A-A-59567/1 Hose Assemblies, Garden, Water, and Water Suction, Ribbed Shank (Short or Long), with Pin or Hex Lug Swivel
A-A-59567/2 Hose Assemblies, Garden, Water, and Water Suction, Expansion Shank, Compression Ferrule, or Hose Clamp
A-A-59567/3 Hose Assembly, Garden, Water, and Water Suction, Rocker Lug Swivel Type Coupler
A-A-59567/4 Hose Assembly, Garden, Water, and Water Suction, Pin Lug Swivel Type Coupler
A-A-59567/5 Hose Assembly, Garden, Water, and Water Suction, Long Handle Swivel Type Coupler
A-A-59567/6 Hose Assembly, Garden, Water, and Water Suction, Shank Type Coupler and Adapter with Interlocking Clamps
A-A-59567/7 Hose Assembly, Garden, Water, and Water Suction, Hex, Shank Type Coupler
A-A-50351 - Hose, Bronze, Annular Corrugated Metal, Single Braid Flexible, Gas Tight
This commercial item description (CID) covers the general requirements for hose, bronze, annular corrugated metal, single braid flexible, gas tight. Hose bronze, annular corrugated metal, single braid flexible, gas tight covered by this CID is intended for commercial/industrial applications.
A-A-52047 - Tubing, Nonmetallic (Rubber And Plastic)
This commercial item description (CID) covers the general requirements for tubing, nonmetallic (rubber and plastic). Tubing, nonmetallic (rubber and plastic) covered by this CID is intended for commercial/industrial applications.
A-A-52413 - Hose, Rubber; Oil Suction, Wire-Reinforced (S/S By Sae-J517)
This commercial item description (CID) covers two types of bulk wire-reinforced hydraulic suction hose for use in hydraulic suction lines.
A-A-52426 - Hose And Hose Assemblies, Non-Metallic, Silicone, Polyester And Wire Reinforced (For Coolant And Heating Systems Of Diesel And Gasoline Powered Engines)
This CID covers polyester and wire reinforced, silicone compounded, elastomeric hose and hose assemblies, for coolant and heating systems of diesel and gasoline powered engines, with a temperature range from -40 deg. F to +425 deg. F. All hose types are intended for severe service such as on cars, buses, heavy duty military and commercial trucks, military combat vehicles, and off-road earth moving equipment. Type I (1/2 inch inside diameter (ID) thru 1 1/8 inch ID) hose is intended for connecting hot water heaters to coolant circulating systems of ground vehicles. The hose and hose assemblies described in this CID are hereinafter referred to as "hose".
A-A-52435 - Hose Assemblies, Metal: Flexible, Fuel And Oil
This CID covers two types of flexible hose assemblies for the conveyance of gasoline or oil or for other applications when installed in military vehicles or other U.S. Army equipment with the exception of use with aircraft engine fluid lines.
A-A-52546 - Hose, Preformed:Semi-Flexible, Reinforced
This CID covers one type of semi-flexible preformed hose, for air induction on heavy duty engines.
A-A-52546/1 - Hose, Preformed, Air Cleaner, Semi-Flexible, Heavy Duty 517 Kilopascals (75 Psi) Burst
A-A-52554 - Hose And Hose Assemblies, Nonmetallic: Elastomeric, Liquid Fuel (S/S By Mil-Prf-370)
This commercial item description (CID) applies to elastomeric, liquid fuel transfer hose and hose assemblies. The hose and hose assemblies are intended to be used for liquid fuel suction and discharge.
A-A-55697 - Tube, Nonmetallic; Polyvinyl Chloride (Pvc) Flexible (For Laboratory And Medical Use)
This commercial item description (CID) covers the general requirements for clear flexible PVC tubing. Clear flexible PVC tubing covered by this CID is intended for commercial/industrial applications in medical and laboratory application, including fluid signals, low pressure air, gas, and vacuum but not limited to medical transfusions and infusions.
AN6264 - Hose Assembly & Detachable End Fitting Type, Swivel Fittings, Medium High Pressure Fuel, Oil And Coolant (S/S By Ms28741)
AN6270 - ( Images) Hose Assembly - Detachable Swivel Fitting, Low Pressure
FED-STD-162 - Hose, Rubber, Visual Inspection Guide For
L-H-520 - Hose And Hose Assemblies, Non-Mettalic (Rubber, Plastic) (S/S By A-A-59270)
L-T-790 - Tube, Nonmetallic; Polyvinyl Chloride (Pvc), Flexible (For Laboratory And Medical Use) (S/S By A-A-55697)
MIL-A-5878 - Adapter, Pressure Fuel Servicing, Types A-1 & A-6 (Use Mil-A-25896)
MIL-C-83291 - Cover, Self-Sealing, Fuel Line, Aircraft
This specification covers the requirements for aircraft self-sealing fuel line covers, including self-sealing hoses.
MIL-D-26124 - Duct And Duct Assembly, Pneumatic, Flexible (S/S By Mil-D-22706)
This specification covers a flexible pneumatic duct and duct assembly for use in the delivery of high-flow, low-pressure air at temperatures to 500 degrees F.
MIL-D-2690 - Doors, Curtain, Rolling, Steel, Pilasters, And Their Operating Equipment
MIL-D-38386 - Duct Assembly, Ground, Conditioned Air, Insulated, Flexible (S/S By Sae-As38386)
This specification covers insulated, flexible air duct assemblies for portable ground support air conditioners and heaters.
MIL-D-43792 - Duct, Exhaust (Must)
MIL-DTL-13444 - Hose And Hose Assemblies, Rubber: Fuel And Oil
This specification covers hose and hose assemblies, rubber: fuel and oil. The hoses described in this specification consist of two types of fuel and oil hose, hose assemblies for military engine installations and other uses (see 6.1).
MIL-DTL-13531 - Hose And Hose Assembly, Rubber (Hydraulic, Pneumatic, Flexible)
This specification covers hose and hose assembly, rubber (hydraulic, pneumatic, flexible) (see 6.1). These hoses are not for use as oxygen hoses.
MIL-DTL-17505 - Hose And Hose Assembly, Rubber, Oil And Gasoline, Suction And Discharge
This specification covers smooth-bore hose and hose assemblies for suction and discharge service in the transfer of fuels, such as Navy special fuel oil, diesel fuel, oil, jet fuel (JP-5 or JP-8), motor gasoline, and aviation gasoline. The hose is intended to handle petroleum products having an aromatic content no greater than 30 percent. The maximum working pressure of this hose is 150 pound-force per square inch (psi) (1 034 kilopascal (kPa)).
MIL-DTL-17902 - Hose, End Fittings And Hose Assemblies, Synthetic Rubber, Aircraft Fuels
This specification covers both aircraft fuel, synthetic rubber collapsible and noncollapsible hose assemblies and end fittings.
MIL-DTL-20176 - Hose And Hose Assembly, Rubber, Smooth Bore, Light-Weight Sewage Discharge And Oily Waste Discharge
This specification covers smooth bore, sewage discharge, and oily waste discharge rubber hose and hose assemblies.
MIL-DTL-22706 - Duct And Scuff Cover, Pneumatic, Flexible
This specification covers flexible pneumatic ducts and scuff covers for delivery air at temperatures to 600 Deg F as specified in 6.1.
MIL-DTL-25579 - Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification For
This specification contains the requirements for medium pressure, high temperature, polytetrafluoroethylene (PTFE) hose assemblies, reinforced with a corrosion-resistant steel (CRES) wire braid for use in fuel, lubricating oil, water-alcohol, hydraulics and pneumatic systems within the limits specified herein.
MIL-DTL-26499 - Hose Assembly, Metal, Flexible, Breathing Oxygen
This specification covers one type of metal flexible hose assembly with a nominal working pressure of 2,400 psi (165.47 bar) in the operating temperature range from -65 degrees F to +160 degrees F (-53.89 degrees C to +71.11 degrees C).
MIL-DTL-26521 - Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature With Non-Reusable Couplings
This specification covers collapsible synthetic rubber hose assemblies for ground fueling of aircraft with hydrocarbon fuels or non-potable water where working pressures do not exceed 225 psi.
MIL-DTL-26633 - Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen
This specification covers one type of hose assembly, nonconductive, polytetrafluoroethylene, oxygen having a nominal working pressure of 3,000 psig (206.84 bar) in the operating temperature range from -65 degrees F to +160 degrees F (-53.89 degrees C to 71.11 degrees C).
MIL-DTL-26666 - Hose Assembly, Pneumatic, High Pressure
This specification covers the requirements for a hose assembly, pneumatic, high pressure having a nominal working pressure of 4,000 psig (275.79 bar) in the operating temperature range of -65 to +160 Degrees F (-53.89 Degrees C to 71.11 Degrees C). DO NOT USE FOR OXYGEN. DO NOT USE ON AIRCRAFT.
MIL-DTL-26894 - Hose And Hose Assembly, Rubber, Gasoline, Refueling, Low Temperature
This specification contains the requirements for a low temperature, 4-inch ID gasoline refueling rubber hose and hose assembly.
MIL-DTL-27267 - Hose, Cres Wire Reinforced, Polytetrafluoroethylene, 450 Degrees F, Medium Pressure
This specification covers the requirements for a hose, CRES reinforced, polytetrafluoroethylene, 450┬░F, medium pressure (see 3.5.1).
MIL-DTL-27516 - Hose And Hose Assembly, Nonmetallic, Suction And Discharge
This specification contains the requirements for a non-collapsible, wire reinforced, synthetic rubber hose and hose assembly used with gasoline and jet-fuel.
MIL-DTL-28693 - Hose, Rubber, Oil And Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinally Reinforced, 6 Inch
This specification covers a hose, rubber, oil and gasoline discharge, smooth bore, lightweight buoyant type, longitudinally reinforced, 6 inch furnished with couplings and a hose support ring. The system is intended for use as part of a buoyant fueling system. The maximum working pressure of this hose is 150psi (1 MPa).
MIL-DTL-29210 - Hose Assembly, Rubber, Metal Lined, Wire Reinforced, 250 Psig, Saturated Steam Service
This specification covers metal lined, wire reinforced, rubber-hose assemblies for conveyance of saturated steam. The working pressure of this hose is 250 pound-force per square inch gauge (psig) (1.72 MPa gauge) at a temperature of 406 Deg. F (208 Deg. C).
MIL-DTL-3992 - Hose And Hose Assembly, Rubber, Air And Vacuum Brake, Systems
This specification covers the construction, performance, and quality requirements of hose and hose assembly, rubber, air and vacuum brake systems intended for use as flexible connections on automotive air and vacuum brake systems in a temperature range from -60 degrees F to +200 degrees F (-51.1 degrees C to +93.3 degrees C), inclusive (see 6.1).
MIL-DTL-52471 - Hose And Hose Assemblies, Rubber, Hydraulic Pressure Type, General Specification For
This specification covers pressure-type, wire-reinforced, rubber, hydraulic hose and hose assemblies. The core of this specification uses SAE-J517. The operating pressures range between 625 psi to 7,500 psi (4.3 to 48.3 MPa). The operating temperate range -40 Degrees F to +212 Degrees F (-40 Degrees C to 100 Degrees C).
MIL-DTL-52471/1 - Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 1001R1, Single-Wire Braided Reinforcement Hose
MIL-DTL-52471/10 - Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose
MIL-DTL-52471/2 - Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100R2, Double-Wire Braided Reinforcement Hose
MIL-DTL-52471/3 - Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100Re, Four Wire Braided Reinforcement Or Multiple Wire Braided Steel Wire Reinforced Hose
MIL-DTL-52471/4 - Hose, Rubber, Hydraulic Pressure-Type, Type 100R1 Single-Wire-Braided Reinforcement Hose
MIL-DTL-52471/5 - Hose, Rubber, Hydraulic Pressure-Type, Type 100R2 Double-Wire-Braided Reinforcement Hose
MIL-DTL-52471/7 - Hose, Rubber, Hydraulic Pressure-Type, Type 100Re Four-Spiral-Wrap Reinforcement Hose
MIL-DTL-52471/8 - Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100Re
MIL-DTL-52471/9 - Hose, Rubber: Hydraulic Pressure-Type; Type 100R12 Four-Spiral-Wrap Reinforcement Hose
MIL-DTL-5593 - Hose, Aircraft, Low Pressure Air And Vacuum, Flexible
This specification covers a low-pressure, flexible hose for use in aircraft applications.
MIL-DTL-6000 - Hose, Rubber, Aircraft, Fuel, Oil, Coolant, Water, And Alcohol
This specification covers the requirements for hose, rubber, aircraft, fuel, oil, coolant, water, and alcohol, for use in aircraft engine applications.
MIL-DTL-81581 - Hose Assemblies, Breathing Oxygen And Air, General Specification For
This specification covers the general requirements for low pressure and high pressure hose assemblies used in breathing oxygen and air in pressure suit systems and individual survival equipment.
MIL-DTL-81581/1 - Hose Assemblies, Air, Low Pressure, Highly Flexible
This specification sheet covers the detail requirements for highly flexible, low pressure, air hose assemblies for use with individual survival equipment.
MIL-DTL-81581/2 - Hose Assemblies, Breathing Oxygen, High Pressure With Connections For An Integrated Communication System
This specification sheet covers the detail requirements for high pressure, breathing oxygen hose assemblies with connections for integrated communication systems.
MIL-DTL-81581/3 - Hose Assemblies, Breathing Oxygen, High Pressure, Without Connections For Communication Systems
This specification sheet covers the detail requirements for high pressure oxygen hose assemblies without connections for communication systems.
MIL-DTL-81581/4 - Hose Assemblies, Breathing Oxygen, Low Pressure, With/Without Connections For An Integrated Communication System
This specification sheet covers the detail requirements for two types of low pressure oxygen hose assemblies which extend from the oxygen mask to a connector or chest-mounted regulator.
MIL-DTL-81581/5 - Hose Assemblies, Breathing Oxygen, Low Pressure, Connector To Regulator
This specification sheet covers the detail requirements for three types and four styles of low pressure oxygen breathing hose assemblies from connector to regulator, with or without integrated services for communication continuity.
MIL-DTL-81581/6 - Hose Assemblies, Breathing Oxygen And Air, Hose Kits And Mated Assemblies
This detail specification sheet covers the additional requirements for hose assemblies procured as kits where the mated components must be tested for integrity and interchangeability.
MIL-DTL-81581/7 - Hose Assemblies, Combined Assemblies, Hose And Communication Cable
This specification sheet covers the detail requirements for hose assemblies covered by individual detail specifications and fastened together to make up a combined hose assembly.
MIL-DTL-81581/8 - Hose Assemblies, Cable Assemblies, Communication, Associated
This specification sheet covers the requirements for communication cable assemblies used with the applicable hose assemblies utilized in the Naval aviator??s life support systems.
MIL-DTL-83298 - Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 Psi), Hydraulic And Pneumatic
This specification covers the requirements for hose, conductive polytetrafluoroethylene tube, high temperature, high pressure (3000 psi), hydraulic and pneumatic (see 6.1).
MIL-DTL-83796 - Hose Assembly, Rubber, Lightweight, Medium Pressure, General Specification For
This specification covers the requirements for hose assembly, rubber, lightweight, medium pressure. For use in fuel and lubricating oil systems operating at 200 to 1000 psi and at a temperature range -65 Degrees F to 250 Degrees F.
MIL-DTL-83796/1 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare To Flare
MIL-DTL-83796/2 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare To Flare, With Lockwire Hole
MIL-DTL-83796/3 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless To Flareless
MIL-DTL-83796/4 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless To Flareless, With Lockwire Hole
MIL-DTL-83796/5 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare To Flange
MIL-DTL-83796/6 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare To Flange, With Lockwire Hole
MIL-DTL-83796/7 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless To Flange
MIL-DTL-83796/8 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless To Flange, With Lockwire Hole
MIL-DTL-83796/9 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flange To Flange
MIL-DTL-83797 - Hose, Rubber, Lightweight, Medium Pressure, General Specification For
This specification covers the general requirements for hose, rubber, lightweight, medium pressure, with operating limits of -65 to 250 Degrees F and 200 to 1000 psi suitable for aircraft fuel and oil systems within the limits specified herein.
MIL-DTL-8788 - Hose, Rubber, Hydraulic, High Pressure 3,000 Psi, Operating Temperature Range -65 Degrees F To +160 Degrees F
This specification covers the requirements for hose, rubber, hydraulic, high pressure (3000 psi) operating temperature range -65 Degrees F to +160 Degrees F (see 6.1).
MIL-DTL-8790 - Hose Assemblies, Rubber, Hydraulic, High Pressure 3,000 Psi, Operating Temperature Range -65 Degrees F To +275 Degrees F, Field Attachable
This specification covers the requirements for hose assemblies, rubber hydraulic, high pressure 3000 psi, operating temperature range -65 degrees F to +275 degrees F.
MIL-DTL-8794 - Hose, Synthetic Rubber - Hydraulic Fluid, Fuel, And Oil Resistant
This specification covers hose, synthetic rubber - hydraulic fluid, fuel, and oil resistant.
MIL-DTL-8795 - Hose Assemblies, Elastomeric, Hydraulic, Fuel, And Oil Resistant, General Specification For
This specification covers the requirements for hose assemblies, elastomeric, hydraulic, fuel, and oil resistant.
MIL-H-0015100 - Hose, Rubber, Wire Reinforced (Oil And Gasoline, Suction And Discharge Smooth Bore)
MIL-H-10868 - Hose Assembly, Rubber, Utility, Gasoline (1/4-Inch Inside Diameter)
This document covers a gasoline utility hose assembly used to transfer fuel from the source to the stove adapter.
MIL-H-1142 - Hose, Rubber, Cutting, And Welding, Fuel, Gases, Oxygen And Air (Use Zz-H-461)
MIL-H-13247 - Hose, Gas Mask, M3
MIL-H-13266 - Hose, Mask, Gas, Horse
MIL-H-13524 - Hose Assemblies, Metal: Flexible, Fuel And Oil (S/S By A-A-52435)
This specification covers two types of flexible hose assemblies for the conveyance of gasoline or oil or for other applications for low pressure automotive use.
MIL-H-15217 - Hose, Rubber, Sandblast (S/S By Iso3861)
This specification covers rubber hose with antistatic features for wet and dry sandblasting.
MIL-H-15523 - Hose And Hose Assemblies, Rubber, Oil- And Gasoline-Discharge, Smooth-Bore, Light Weight
MIL-H-15923 - Hose And Hose Assemblies, Rubber, Wrapped And Braided, Water Service (Use Zz-H-601)
MIL-H-15924 - Hose And Hose Assemblies, Smooth Bore Water Suction (Use Zz-H-561)
MIL-H-16449 - Hose, Oil-And Gasoline-Suction-And-Discharge, Smooth-Bore, Light-Weight (Circular Woven Fabric, Wire-Inserted)
MIL-H-17666 - Hose, Metal, Corrugated Bronze, High Pressure Air Service
This specification covers flexible bronze base and couplings of the corrugated type for high pressure air service (up to 3300 p.s.i.).
MIL-H-18158 - Hose Ducting, Low Pressure, Naval Shipboard Portable, Ventilating Set Use
This specification covers lightweight, cloth covered, wire reinforced, helical scam, portable ventilation hose used aboard Navy ships.
MIL-H-18160 - Hose Assemblies, Corrugated, Steel, 200 Lb/In2 And 425 Degrees F Maximum Steam Service Rating
This specification covers coupled flexible metal hose of either helical or annular corrugated type construction for steam service up to 200 pounds per square inch and 425 deg. F.
MIL-H-18162 - Hose Assemblies, Air Duct, Low Pressure, Fabric, Reinforced, Retractable And Compressible Types, Shipboard Use
MIL-H-18288 - Hose And Hose Assemblies, Aircraft, Self Sealing, Aromatic Fuel (S/S By Mil-Prf-7061)
MIL-H-19030 - Hose Assemblies, Rubber, Wire Reinforced, 200 Psig, Maximum Saturated Steam Service (Use Mil-H-28596)
MIL-H-19034 - Hose, Metal, Flexible, Corrugated Carbon Steel And Corrosion Resisting Steel Types, Internal Combustion Engine Air Intake And Exhaust Applications (For Surface Vessels Only) (S/S By A-A-59735)
This specification covers flexible corrugated metal hose without couplings for engine air intake and exhaust lines.
MIL-H-19091 - Hose Assemblies, Rubber, Oil And Gasoline Discharge, Smooth Bore, Light Weight, Buoyant Type, 5 Inch Size
MIL-H-19606 - Hose And Hose Assemblies, Synthetic Rubber Reinforced, Water-And Oil-Resistant, Medium And High Pressure, Nonmagnetic And Regular Service (Use Mil-H-24135)
MIL-H-19639 - Hose Assemblies, Rubber, Paint Spray Equipment (Use Zz-H-521)
MIL-H-19992 - Hose Assemblies, Flexible (Pneumatic), High Pressure Oil Resistant
MIL-H-21291 - Hose Assemblies, Noncollapsible, For Aviation Fuels (S/S By Mil-H-17902)
This specification covers noncollapsible hoses for transporting aviation fuels or any petroleum-base fluid.
MIL-H-21394 - Hose Assemblies, Synthetic Rubber, Aviation Fuel Discharge, Noncollapsible (Use Mil-H-22240)
MIL-H-2217 - Hose Assemblies, Wire-Reinforced Rubber, Submarine Rescue Chamber
This specification covers 1 - and 1-1/4-inch inside diameter (id), wire-reinforced hose assemblies for use on submarine rescue chambers designed to operate at depths up to 850 feet.
MIL-H-22240 - Hose, Rubber, Petroleum Based Fuels And Water Services, Discharge Only Smooth Bore, Lightweight Buoyant Type
This specification covers lightweight, smooth bore, petroleum based fuels and water service discharge rubber hoses.
MIL-H-22279 - Hose Assemblies, Rubber, Aircraft Fueling Collapsible, By Negative Pressure (Refer To Api 1529 And Nfpa 407)
MIL-H-22297 - Hose Assembly, Rubber, 4-Inch Id, With Quick-Acting Couplings, Adapters, And Filler Elbows (Use Mil-H-370 And Mil-C-27487)
MIL-H-22343 - Hose Assemblies, Metal, Liquid Oxygen
This specification covers metal hose assemblies suitable for use with liquid oxygen.
MIL-H-22605 - Hose, Bronze, Flexible And Mechanical End Fittings For (S/S By A-A-50351)
MIL-H-23564 - Hose Assemblies, Retractable, Light Weight, For Aircraft Cooling
MIL-H-2373 - Hose, Gasoline, Slip-On Type (Army)
MIL-H-23799 - Hose Assembly, Metal, Transfer, Liquid Oxygen
This specification covers one type of liquid oxygen, transfer, metal hose assembly.
MIL-H-24135 - Hose, Synthetic Rubber, Wire Reinforced For Flexible Hose Assemblies, General Specification For
This specification covers the requirements for hose, hose assemblies.
MIL-H-24135/1 - Hose, Synthetic Rubber, Wire Reinforced For Flexible Hose Assemblies (Double Wire Braid Or Two-Spiral And One-Wire Braid, High Pressure Sizes -4 Through -32)
MIL-H-24135/10 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Four Plies, Heavy Spiral Wrapped Wire, High Pressure, Sizes -4 Through -48)
y equipment under the jurisdiction of the Department of Defense. b. Guides for the choice and application of audio components for use in military equipment.
MIL-T-15514 - Telephone Equipment, Sound Powered Telephone Handset, Headset, And Headset-Noise Attenuating, General Specification For
This specification covers sound powered telephone handsets, headsets, and headset-noise attenuating for Naval shipboard and shore use.
MIL-T-24632 - Telephone System, Sound-Powered, Ships Service An/Wtc-2( )(V)
This specification covers a ships service sound-powered telephone system, (circuit 1MJ) for Naval ships.
MS25070 - Microphone Boom, Mt-521A/U
MS25071 - Bracket, Mt-522A/U
MS26544 - Microphone Boom, Hinged Type Mt-521A/U (Modified)
MS33500 - Wiring Diagram - Carbon Microphone Simulator, Schematic
MS75105 - Hb-7 Headband Assembly (See Notice 3 For Replacement Information)
MS75106 - Sub-Assembly Guide Plate And Barrel (See Notice 3 For Replacement Information)
MS75107 - Guide Plate
MS75108 - Guide Barrel (See Notice 3 For Replacement Information)
MS75109 - Friction Spring (See Notice 3 For Replacement Information)
MS75110 - V-Clip (See Notice 3 For Replacement Information)
MS75111 - U-Clip (See Notice 3 For Replacement Information)
MS75112 - Rivet (See Notice 3 For Replacement Information)
MS75113 - Cupwasher ( See Notice 3 For Replacement Information)
MS75114 - Subassembly Of Receiver Holder (See Notice 3 For Replacement Information)
MS75116 - Yoke (See Notice 3 For Replacement Information)
MS75117 - Bale Rod (See Notice 3 Replacement Information)
MS75118 - Yoke Stud (See Notice 3 For Replacement Information)
MS75119 - Roll Pin (See Notice 3 For Replacement Information)
MS75120 - Band (See Notice 3 For Replacement Information)
MS75121 - Headband Cover (See Notice 3 For Replacement Information)
MS75122 - Co-162 Cable (See Notice 3 For Replacement Information)
MS75123 - Cord C0169 (See Notice 3 For Replacement Information)
MS75124 - Ring Terminal (See Notice 3 For Replacement Information)
MS75125 - Tm-51 Terminals (See Notice 3 For Replacement Information)
MS75128 - Cushion, Earphone (See Notice 3 For Replacement Information)
MS75129 - Earphone Retainer (See Notice 3 For Replacement Information)
MS75130 - Cup, Earphone (See Notice 3 For Replacement Information)
QPL-12487 - Headsets Electrical (Headsets Electrical H-16( ) And Headset H-65( )/U))
QPL-12606-17 - Loudspeaker, Permanent Magnet (Unencased, 3-Inch And 4-Inch Diameter Cone, 2-Watt; Fungus-, And Immersion-Resistant), Type Ls-445/U, M12606-01, And M12606-02 (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-15514-18 - Telephone Equipment, Sound Powered Handsets, Headset Chest Sets, And Headset Microphones, Types H-200/U, H-201/U, H-202/U, H-203/U, And H-204/U
QPL-17080-15 - Loudspeakers, Permanent Magnet, For Shipboard Entertainment Systems
QPL-18239-11 - Earphones, H-87B/U
QPL-21393-11 - Microphone, Dynamic M-92C/U
QPL-21734-7 - Microphone, Dynamic, Oxygen Mask, M-94B/A
QPL-22001-5 - Microphone, Carbon, Oxygen Mask, Anb-M-C1
QPL-22063-3 - Headset, H-173B/Aic (See Notice 1 For Replacement Information)
QPL-22179-6 - Microphone, Dynamic M-96B/A
MIL-H-24135/11 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies, (Four Ply Spiral Wire Wrap, Low Pressure, Sizes -80 And -96)
This specification covers synthetic rubber hoses, reinforced with four layers of spiral wire in sizes -80 and -96 for low pressure fluid applications.
MIL-H-24135/12 - Hose, Synthetic Rubber, Wire Reinforced, High Performance, For Flexible Hose Assemblies (Single Wire Braid Over Single Synthetic Fiber Braid Medium Pressure, High Temperature, Multi-Fluid, Sizes -4 Through -40)
This associated detail specification covers high performance synthetic rubber hoses, reinforced with a single layer of wire braid over a single layer of synthetic fiber braid in sizes -4 through -40 for medium pressure multi-fluid applications. Hose to this associated detail specification is compatible with both petroleum based and phosphate ester based oils. Hose to this associated specification sheet shall be colored blue.
MIL-H-24135/13 - Hose, Synthetic Rubber, Wire Reinforced, High Performance For Flexible Hose Assemblies (Double Wire Braid, High Pressure, High Temperature, Multi-Based Oil, Sizes -4 Through -32)
This specification covers synthetic rubber hoses, reinforced with two braids of wire in sizes -4 through -32 for high pressure, high temperature multi-fluid applications. Hose to this associated detail specification is compatible with both petroleum and phosphate ester based oils. Hose to this associated detail specification sheet shall be colored blue.
MIL-H-24135/2 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Four Plies Spiral Wrapped, Or Two Spiral And One-Wire Braid, High Pressure, Sizes -6 Through -16)
MIL-H-24135/3 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Four Plies, Spiral Wrapped, High Pressure, Sizes -16 Through -32)
MIL-H-24135/4 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Double Wire Braid) Medium Pressure, Sizes -40, -48 And -64)
MIL-H-24135/5 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Double Wire Braid, Perforated Cover For High Pressure Gas, Sizes -4 Through -32)
This specification covers synthetic rubber hoses, reinforced with two braids of wire braid, with a perforated outer cover, in sizes -4 through -32 for high pressure air applications.
MIL-H-24135/6 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Double Wire Braid Or Two-Spiral And One-Wire Braid, High Pressure, Sizes -4 Through -32 For Phosphate Ester Base Hydraulic Fluids)
This specification covers synthetic rubber hoses, reinforced with two braids of wire or two spiral and one wire braid in sizes -4 through -32 for high pressure phosphate ester based fluids.
MIL-H-24135/7 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Four Plies, Spiral Wrapped Wire, High Pressure, Sizes -20, -24 And -32, For Phosphate Ester Base Fluids)
This specification covers synthetic rubber hoses, reinforced with four layers of heavy spiral wrap wire reinforcement in sizes -20, -24 and -32 for high pressure phosphate ester fluid applications.
MIL-H-24135/8 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Four Plies, Spiral Wrapped Wire, High Pressure, Sizes -6 Through -16, For Phosphate Ester Base Fluids)
This specification covers synthetic rubber hoses, reinforced with four plies of spiral wrapped wire in sizes -6 through -16 for high pressure hydraulic applications.
MIL-H-24135/9 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies (Four Plies Heavy Spiral Wrapped Wire, High Pressure, Sizes -8 Through -32)
This specification covers synthetic rubber hoses, reinforced with four plies heave spiral wrap wire in sizes -8 through -32 for high pressure fluid applications.
MIL-H-24136 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced For Flexible Hose Assemblies, General Specification For
This specification covers the requirements for synthetic fiber reinforced rubber hose for use with reusable end fittings for low, medium and high pressure service in water, oil and gas services.
MIL-H-24136/1 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced For Flexible Hose Assemblies Sizes -80 Through -192)
This specification covers synthetic fiber reinforced hoses in sizes -80 through -192 for use in low pressure applications.
MIL-H-24136/2 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, For Flexible Hose Assemblies (High Pressure Sizes -4 Through -32)
This specification covers synthetic fiber reinforced rubber hoses in sizes -4 through -32 for use in high pressure applications.
MIL-H-24136/3 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced For Flexible Hose Assemblies (Low Pressure Sizes -4 Through -32)
This specification covers synthetic fiber reinforced hoses in sizes -4 through -32 for use in low pressure applications.
MIL-H-24136/4 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, For Flexible Hose Assemblies (Low Pressure Sizes -40, -48 And -64)
This specification covers synthetic fiber reinforced hoses in sizes -40, -48 and -64 for low pressure applications.
MIL-H-24520 - Hose And Hose Assembly For Water Cooling Of Electronic Equipment
This specification covers a smooth bore, reinforced, seamless hose and end fittings for use in distilled or demineralized water cooling loops in a high voltage environment.
MIL-H-24565 - Hose And Fittings, Oil And Turbine Fuel, Smooth Bore, Corrugated Cover, 7-Inch
This specification covers a 7-inch, smooth bore hose with corrugated cover, including fittings, used for receiving oil and turbine fuel with the probe fueling system receivers.
MIL-H-24592 - Hose Assembly, Tetrafluoroethylene Tube, Noncollapsible, High Temperature
This specification covers tetrafluoroethylene (TFE) hose assemblies for low pressure, vacuum steam system in marine piping systems. They may be used for other systems where the pressure, temperature, and vacuum conditions do not exceed the limitations of the hose.
MIL-H-24595 - Hose, Wire-Reinforced Large-Diameter With Reusable End Fittings For Flexible Connections (S/S By Mil-H-24135/11)
This specification covers large-diameter, (-80 and -96 sizes) wire-reinforced, flexible hose and associated reusable and fittings for shipboard piping systems.
MIL-H-26686 - Hose Assembly, Tetrafluoroethylene Red And White Fuming Nitric Acid Resistant
MIL-H-2699 - Hose, Pneumatic (Braided Or Wrapped) (Use Zz-H-500)
MIL-H-27301 - Hose Assembly, Metal, Cryogenic Liquid, Transfer
This specification covers a nonvacuum insulated metal hose assembly for transferring cryogenic liquids.
MIL-H-27462 - Hose Assembly, Pneumatic, High Pressure (8500 Psi)
MIL-H-27508 - Hose Assembly, Rubber Grk-6/E32R-1 (S/S By Mil-H-26521 Now Mil-Dtl-26521)
MIL-H-2817 - Hose, Synthetic Rubber, Wire Stiffened, Suction And Discharge, Ship'S Salvage
MIL-H-28596 - Hose And Hose Assembly, Rubber, Steam (S/S By A-A-59159)
This specification covers braided or wrapped rubber hose for conveyance of saturated steam.
MIL-H-28692 - Hose, Nonmetallic, Portable Water Discharge, Smooth-Bore, Lightweight, 4 Inch, With Reattachable Coupling
This specification covers a 4-inch, lightweight, smooth-bore, potable water discharge hose, suitable for use within a temperature range of -25 to 130 degrees Fahrenheit (Deg. F), furnished with couplings and a hose support ring. The hoses and couplings are intended for use as components of a 10,000-foot ship-to-shore buoyant potable water supply system. Storage of the hoses, while not in use, will be in a collapsed state on ship mounted hosereels exposed to weather.
MIL-H-2913 - Hose, Flexible-Metallic, High-Pressure
MIL-H-3726 - Hose, Sulfuric Acid Resistant (Thermoplastic)
MIL-H-38360 - Hose Assemblies, Tetrafluoroethylene, High-Temperature, High Pressure, 3000 Psi, Hydraulic And Pneumatic (S/S By Sae-As604 And Sae-As1339)
This specification covers hose assemblies suitable for use in high temperature, high pressure, hydraulic and pneumatic systems for aircraft and missiles (see 6.1).
MIL-H-38390 - Hose Assembly, Tetrafluoroethylene, Pneumatic, High Pressure (S/S By Sae-As38390)
MIL-H-3868 - Hose Assemblies, Non-Metallic, Grease Gun High And Low Pressure (S/S By Sae-J516 And Sae-J517)
This specification covers hose assemblies (hose and fittings) for use with high and low pressure lubricant dispensing equipment.
MIL-H-4441 - Hose, Rubber, Gasoline, Lightweight (S/S By Mil-H-27516)
MIL-H-4443 - Hose, Rubber, Oil Suction, Wire Reinforced (Use Mil-H-4441)
MIL-H-4450 - Hose, Rubber, Fire, Low Temperature (S/S By Mil-H-52072)
MIL-H-4495 - Hose Assembly, Rubber, Aerial Refueling
This specification contains the design and test requirements of flexible hose assemblies for use in aerial refueling systems.
MIL-H-4722 - Hose Assembly, High Pressure, Breathing Oxygen
This specification covers a high-pressure oxygen hose assembly having a normal working pressure of 2,500 psi.
MIL-H-47305 - Hose Assembly
This specification defines requirements for four types of hose assemblies.
MIL-H-51059 - Hose, Fuel, Flame Thrower, M8
MIL-H-52079 - Hose, Preformed: Semi-Flexible, Reinforced (S/S By A-A-52546)
This specification covers requirements for one type of semi-flexible preformed hose, for air induction on heavy duty engine.
MIL-H-52262 - Hose Assembly, Elastomeric: Lightweight, Collapsible, 4 Inch
This specification covers a 4-inch. lightweight, collapsible elastomeric hose assembly and flaking box assembly.
MIL-H-52274 - Hose, Rubber, And Hose Assemblies, Rubber, Hydraulic, High-Pressure (Use Mil-H-52471, Mil-H-13531 And Mil-H-8794)
MIL-H-52471/6 - Hose, Rubber, Hydraulic Pressure-Type, Type 100R10 Four-Spiral-Wrap Reinforcement Hose (See Notice 1 For Replacement Information)
MIL-H-52544 - Hose, Rubber: Oil Suction, Wire-Reinforced (S/S By A-A-52413)
This specification covers wire-reinforced hydraulic suction hose.
MIL-H-52555 - Hose Assembly, Rubber, Lightweight, Collapsible, 2 Inch, For Liquid Petroleum Fuels
MIL-H-53062 - Hose Assembly, Rubber, Lightweight, Collapsible 6 Inch For Pol Service (S/S Mil-H-0053073)
This specification covers a 6-inch, lightweight, collapsible rubber hose assembly for POL service; swivel, and flaking box.
MIL-H-53073 - Hose Assembly, Elastomeric: Fuel Discharge, Collapsible, Lightweight(S/S By Mil-Prf-370)
This specification covers collapsible, elastomeric discharge hose assemblies.
MIL-H-5512 - Hose Assemblies; Aircraft Hydraulic And Pneumatic, High Pressure (S/S By Mil-Dtl-8788, Mil-Dtl-8790 And Mil-Dtl-8789)
MIL-H-62165 - Hose And Hose Assembly, Thermoplastic, Hydraulic, Flexible
MIL-H-62165/1 - Hose Assembly, Non Metallic, Thermoplastic, Hydraulic, Flexible
MIL-H-62165/2 - Hose, Non Metallic, Thermoplastic, Hydraulic, Flexible
MIL-H-62217 - Hose And Hose Assemblies, Non-Metallic, Silicone, Polyester And Wire Reinforced (For Coolant And Heating Systems Of Diesel And Gasoline Powered Engines) (S/S By A-A-52426)
This specification covers polyester and wire reinforced, silicone compounded, elastomeric hose and hose assemblies, for coolant and heating systems of diesel and gasoline powered engines.
MIL-H-62217/1 - Hose, Nonmetallic Straight, Silicone, Polyester Reinforce (Radiator And Heater) (S/S By A-A-52426)
MIL-H-62217/2 - Hose, Preformed, Silicone, Polyester Reinforced (Radiator) (S/S By A-A-52426)
MIL-H-62217/3 - Hose, Preformed: Flexible, Silicone, Polyester And Wire Reinforced (Radiator) (S/S By A-A-52426)
MIL-H-62217/4 - Hose, Straight, Silicone, Polyester Reinforced, (Sealed Heater Systems) (S/S By A-A-52426)
MIL-H-6399 - Hose, Rubber, Wire-Wound, Synthetic, Ice Eliminating System (S/S By Sae-As6399)
This specification covers one type of lightweight, nonkink flexible hose fabricated of synthetic rubber.
MIL-H-6439 - Hose, Rubber, Aircraft Paint Finish Remover (S/S By Sae-As6439)
MIL-H-7518 - Hose, Fuel Jettison
MIL-H-82127 - Hose Assembly, Rubber (Synthetic), Fuel, Discharge, Collapsible
This specification covers collapsible, synthetic rubber, discharge hose assemblies.
MIL-H-83373 - Hose Assembly, Fluoroelastomer Tube, With Reattachable Couplings For Jp-7 Service
This specification covers hose assemblies for discharge and suction service of MIL-T-38219 (JP-7) turbine fuel.
MIL-H-83797/1 - Hose, Rubber, Lightweight, Medium Pressure, Fuel And Oil Resistant (S/S By Mil-H-83797)
MIL-H-85800 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 And 8000 Psi, General Specification For
This specification defines the requirements for polytetrafluoroethylene (PTFE) lined, aramid fiber reinforced, hose assemblies with dynamic beam seal end fittings for use in aerospace fluid systems.
MIL-H-85800/1 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 And 8000 Psi, Design Standard For Style Straight To Straight
MIL-H-85800/2 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 And 8000 Psi, Design Standard For Style Straight To 45 Degrees
MIL-H-85800/3 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced 5000 And 8000 Psi, Design Standard For Style Straight To 90 Degrees
MIL-H-85800/4 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 And 8000 Psi, Design Standard For Style 45 Degrees To 45 Degrees
MIL-H-85800/5 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 And 8000 Psi, Design Standard For Style 45 Degrees To 90 Degrees
MIL-H-85800/6 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 And 8000 Ps1, Design Standard For Style 90 Degrees To 90 Degrees
MIL-H-87961/1 - Hose, Air Duct, Air Breathing, Type I (S/S By Mil-Prf-87961)
MIL-H-87961/2 - Hose Assembly, Air Duct, Air Breathing, Type Ii (S/S By Mil-Prf-87961)
MIL-H-87961/3 - Hose Assembly, Air Duct, Air Breathing, Type Iii (S/S By Mil-Prf-87961)
MIL-H-899 - Hose, Low Pressure, Fabric, Wire-Stiffened, Retractable
MIL-M-6002 - Marking; Standard Hose, Aircraft (S/S By Sae-Arp6002)
MIL-P-20630 - Packaging And Packing For Overseas Shipment Of Winterization Kits For Engineer Equipment
MIL-PRF-11588 - Hose Assemblies, Rubber, Synthetic, Liquid Petroleum Fuels, Dispensing, Collapsible, Standard And Low Temperature
This specification defines the requirements for collapsible, synthetic rubber, discharge hose assemblies for use in all ambient temperatures between minus (-) 25 and plus (+) 160 degrees Fahrenheit (Degrees F) for standard temperature hose and -60 and +95 Degrees F for low temperature hose.
MIL-PRF-26385 - Hose, Oxygen And Pressurization, Ozone Resistant
This specification covers ozone resistant hoses for use with pressurizing and oxygen breathing systems.
MIL-PRF-26626 - Hose Assembly, Reinforced, Cryogenic, Oxygen
This specification covers reinforced cryogenic hose assemblies with flared tube style fittings.
MIL-PRF-28523 - Hose Assembly, Rubber, Hydraulic And Pneumatic, Jetting (400 Psi Working Pressure)
This specification covers rubber hose assemblies for hydraulic and pneumatic jetting in pile driving, rock drilling, and air compressor use. Hose covered by this specification will be of one type.
MIL-PRF-370 - Hose And Hose Assemblies, Nonmetallic: Elastomeric, Liquid Fuel
This specification covers standard collapsible and non-collapsible, lightweight collapsible, and low temperature non-collapsible elastomeric, liquid fuel transfer hose and hose assemblies.
MIL-PRF-53027 - Hose Assembly, Rubber: Lightweight Collapsible, 6-Inch: For Drinking (Potable) Water
This specification covers a 6-inch (in.), lightweight, collapsible rubber hose assembly for drinking (potable) water (see 6.1).
MIL-PRF-53063 - Hose Assembly, Elastomer, Lightweight, Noncollapsible, Fuel (Metric)
This specification covers lightweight, noncollapsible, elastomer fuel hose assemblies.
MIL-PRF-53064 - Hose Assembly, Elastomer: Lightweight, Collapsible; Liquid Fuel
This specification covers a lightweight, collapsible, elastomer hose assembly for use with liquid fuels (see 6.1).
MIL-PRF-62028 - Hose, Air Duct: High-Temperature Flexible, Reinforced
This specification covers reinforced flexible hose used for transferring heat to crew compartments and preheating engine compartments, oil pans, batteries, fuel and coolant lines, and other components to assist in starting engines under extreme cold weather conditions (see 6.1).
MIL-PRF-83772 - Hose, Assembly, Cryogenic Liquid, Aircraft Servicing
This specification covers a non-vacuum hose assembly for servicing aircraft with cryogenic liquids (liquid oxygen or liquid nitrogen).
MIL-PRF-87961 - Hose And Hose Assemblies, Air Duct, Air Breathing, Oxygen System
This specification covers the requirements for hose and hose assemblies (see 6.9) which supply breathing oxygen to aircrews during the operation of high performance aircraft.
MIL-R-11084 - Rack, Hose, Fire, Hump Type, Wall, With 1 1/2-Inch Valve, Capacity 100 Feet 1 1/2-Inch Hose
MIL-S-52229 - Siphon, Water (Civil Defense)
MIL-STD-166 - Visual Inspection Guide For Rubber Hose (Use Fed-Std 162)
MIL-T-16407 - Tubing, Rubber, Hard, Rigid
MIL-T-17379 - Tubing, Aluminum Bronze, Seamless And Welded
MIL-T-20141 - Tubing, Steel (Rail Carbon) Structural (Use Qq-T-830)
MIL-T-20160 - Tubing, Steel, Seamless Or Welded (Use Ww-P-404)
MIL-T-20162 - Tubing, Steel, Welded (Including Resistance Welded) For Oil, Steam, Or Water (Use Fed Spec Ww-P-404)
MIL-T-20537 - Tubing, Rubber (Synthetic)
MIL-T-25458 - Tubing, Rubber, Silicone, For Inflight Feeding
MIL-T-2914 - Tubing, Steel, Seamless, Diesel-Engine-Fuel-Injection
MIL-T-36966 - Tubing, Nonmetallic, Rubber (S/S By A-A-53848)
MIL-T-47046 - Tubing, Rubber, Urethane, High Strength And Abrasion Resistant
MS18036 - Hose Assembly, Detachable End Fitting, Medium Pressure (S/S By Ms 28741)
MS21365 - Hose, Rubber, Fuel, Collapsible Low Temperature (S/S By Mil-H-26521 Now Mil-Dtl-26521)
MS21366 - Hose Assembly, Rubber, Fuel, Collapsible, Low Temperature, With Reattachable Couplings (S/S By Mil-H-26521 Now Mil-Dtl-26521)
MS22030 - Hose Assemblies, Oxygen, High Pressure
MS22055 - ( Images) Hose Assemblies-Oxygen Breathing, Connector To Regulator
MS24548 - ( Images) Hose Assembly, Tetrafluoroethylene, Oxygen (S/S By Mil-Prf-26626)
MS27363 - Hose Assembly Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I) Flared (S/S By Sae-As153 And Sae-As627)
MS27364 - Hose Assembly, Tetrafluoroethylene, Hydraulic, (3000 P.S.I.) Straight To Elbow 45 Degrees, Flared(S/S By Sae-As154 And Sae-As628)
MS27365 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.) Straight To Elbow 90 Degrees, Flared (S/S By Sae-As155 And Sae-As629)
MS27366 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Elbow 45 Degrees To Elbow 45 Degrees Flared (S/S By Sae-As156 And Sae-As630)
MS27367 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Elbow 45 Degrees To Elbow 90 Degrees Flared (S/S By Sae-As157 And Sae-As631)
MS27368 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.) Elbow 90 Degrees To Elbow 90 Degrees Flared (S/S By Sae-As158 And Sae-As632)
MS27369 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I) Flareless (S/S By Sae-As115 And Sae-As621)
MS27370 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Straight To Elbow 45 Degrees, Flareless (S/S By Sae-As116 And Sae-As622)
MS27371 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Straight To Elbow 90 Degrees Flareless (S/S By Sae-As117 And Sae-As623)
MS27372 - ( Images) Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Elbow 45 Deg. To Elbow 45 Deg., Flareless (S/S By Sae-As118, Sae-As624)
MS27373 - ( Images) Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Elbow 45 Deg. To Elbow 90 Deg., Flareless (S/S By Sae-As119, Sae-As625)
MS27374 - Hose Assembly, Tetrafluoroethylene, Hydraulic And Pneumatic, (3000 P.S.I.), Elbow 90Degrees To Elbow 90 Degrees, Flareless (S/S By Sae-As120 And Sae-As626)
MS27797 - ( Images) Hose, Oxygen And Pressurization Ozone Resistant
MS28741 - ( Images) Hose Assembly, Detachable End Fitting, Medium Pressure
MS28751 - Hose Assembly, Hydraulic And Pneumatic High Pressure, 3000 Psi, Swivel Flareless Connections (S/S By Ms28762)
MS28759 - ( Images) Hose Assembly, Rubber, Hydraulic, 3,000 Psi, Straight To Straight, Flared Tube Field Attachable
MS28762 - ( Images) Hose Assembly, Rubber, Hydraulic, 3000 Psi, Straight To Straight, Flareless Tube Field Attachable
MS28920 - ( Images) Hose Assembly, Rubber, Hydraulic, 3000 Psi, Straight To Elbow 45 Degrees, Flared Tube Field Attachable
MS28921 - ( Images) Hose Assembly, Rubber, Hydraulic, 3,000 Psi, Straight To Elbow 90 Degrees, Flared Tube
MS28922 - Hose Assembly Rubber, Hydraulic, (3,000 Psi), Elbow 45 Deg To Elbow 45 Deg.Flared Tube
MS28923 - Hose Assembly Rubber, Hydraulic, (3,000 Psi), Elbow 45 Deg. To Elbow 90 Deg., Flared Tube
MS28924 - ( Images) Hose Assembly, Rubber, Hydraulic, 3,000 Psi, Elbow 90 Degrees To Elbow 90 Degrees, Flared Tube
MS33620 - Chart, Hose Selection (S/S By Sae-Air797)
MS33790 - ( Images) Bend Data, Minimum, Hydraulic, Pneumatic, Fuel And Oil Hose
MS39261 - Hose, Rubber, Hydraulic, Pressure Type, Nominal Sizes And Maximum Working Pressures (For Engineer Equipment)
MS39262 - Hose, Rubber, Hydraulic, Pressure Type, Single Wire Braid Reinforcement (S/S By Mil-H-52471/4 Now Mil-Dtl-52471/4)
MS39263 - Hose, Rubber, Hydraulic, Pressure Type, Double Wire Braid Reinforcement (S/S By Mil-H-52471/5 Now Mil-Dtl-52471/5)
MS39264 - Hose, Rubber, Hydraulic, Pressure Type, Four Spiral Wrap Reinforcement (S/S By Mil-H-52471/6)
MS39265 - Hose Rubber, Hydraulic, Pressure Type, Six Spiral Wrap Reinforcement (For Engineer Equipment)
MS39266 - ( Images) Hose Assembly, Rubber: Hydraulic, Pressure Type, Length Measurement
MS39267 - ( Images) Hose, Rubber: Hydraulic, Pressure Type Minimum Bend Radius (See Mil-Dtl-52471 And Mil-Dtl-52525)
MS39305 - Hose, Rubber. Oil Suction, Wire Reinforced (S/S By Mil-H-52544)
MS39306 - Hose Assembly, Rubber, Hydraulic, Oil Suction, With Reusable Couplings
MS39316 - Hose Assemblies, Hydraulic, Single Wire Braid Reinforcement, With Reusable Couplings (Use Mil-H-52471/1)
MS39317 - Hose Assemblies, Hydraulic, Double Wire Braid Reinforcement, With Reusable Couplings (S/S By Mil-H-52471/2 Now Mil-Dtl-52471/2)
MS39318 - Hose Assemblies, Hydraulic, 4 Spiral Wrap Reinforcement, With Reusable Couplings (S/S By Mil-H-52471/3 Now Mil-Dtl-52471/3)
MS39319 - Hose Assembly, Hydraulic, 6-Spiral Wrap Reinforcement, With Reusable Couplings
MS39320 - ( Images) Hose Assembly: Measurement Of Coupling Orientation Angle
MS39325 - ( Images) Hose Assemblies; Air (Type I) And Vacuum (Type Ii) Brake 3/8 Inch Nominal Diameter
MS39361 - Hose, Rubber, Hydraulic, Pressure Type, Four Spiral Light Wire Reinforcement
MS500077 - Hose Assembly, Rubber: Hydraulic And Pneumatic, Medium Pressure, Female 37 Degrees Flared Tube
MS500083 - ( Images) Hose Assembly, Nonmetallic. Hydraulic And Pneumatic, High Pressure, Female 37 Degrees Flared Tube
MS51008 - ( Images) Hose, Preformed, Flexible, Engine Coolant 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 3 I.D. (S/S By Sae-J20)
MS52103 - ( Images) Hose Assembly, Nonmetallic: Fuel And Oil, Medium, Pressure, Flared Tube
MS52104 - ( Images) Hose Assembly, Rubber: Fuel And Oil, Low Pressure, Flared Tube
MS52130 - ( Images) Hose, Nonmetallic, Straight, Engine Coolant (S/S By Sae-J20)
MS8000 - ( Images) Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flare
MS8001 - ( Images) Hose Assembly, Polyetrafluorothylene, Reusable Fittings, High Temperature, Medium Pressure, Flareless-To-Flareless
MS8002 - ( Images) Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange
MS8003 - ( Images) Hose, Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Flareless-To-Flange
MS8004 - ( Images) Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flange-To-Flange
MS8005 - ( Images) Hose Assembly, Polytetrafluoroethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-To-Flare
MS8006 - ( Images) Hose Assembly, Polytetrafluoroethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-To-Flareless
MS8007 - ( Images) Hose Assembly, Polytetrafluoroethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-To-Flange
MS8008 - ( Images) Hose Assembly, Polytetrafluorethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-To-Flange
MS8009 - ( Images) Hose Assembly, Polyetetrafluorethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-To-Flange
MS87027 - Hose, Rubber, Lightweight, Medium Pressure, Fuel And Oil Resistant (S/S By Mil-H-83797/1 Now Mil-Dtl-83797/1)
MS87028THRUMS87032 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings (S/S By Mil-H-83796/1 Thru /9 Now Mil-Dtl-83796/1 Thru /9)
MS90457 - ( Images) Hose Assembly Metal, Liquid Oxygen
NAS1369 - Duct, Air, Flexible And Semi-Rigid
NAS1370THRUNAS1379 - Duct, Air, Flexible, Helix Wire Supported
NAS1688 - Hose Assembly Tetrafluoroethylene
NAS1690 - Hose Assembly, Polytetrafluoroethylene, High Temperature, High Pressure, Flared
NAS1691 - Hose Assembly, Polytetrafluoroethylene, High Temperature, High Pressure, Flareless
NAS520 - Coupling, Flexible, Low Pressure, 450 Degree, Air Line
NAS521 - Coupling, Flexible, Low Pressure
NAS522 - Coupling, Flexible, Low Pressure
QPL-13444-37 - Hose And Hose Assemblies, Rubber: Fuel And Oil (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-13531-42 - Hose, Rubber And Hose Assembly, Rubber (Hydraulic, Pneumatic, Flexible)
QPL-17666-4 - Hose, Metal, Corrugated Bronze, High Pressure Air Service
QPL-18158-20 - Hose Assembly, Air Duct, Low Pressure, Fabric, Wire Stiffened, Retractable, Naval Shipboard Portable Ventilating Set Use
QPL-18160-27 - Hose Assemblies, Corrugated Steel, 200 Psi And 425 Degrees F. Maximum Steam Service Rating
QPL-18288-3 - Hose And Hose Assemblies, Aircraft, Self Sealing, Aromatic Fuel
QPL-19030-25 - Hose Assembly, Rubber, Wire Reinforced, 200 Psig, Maximum Saturated Steam Service (S/S By Mil-H-28596)
QPL-19606 - Hose And Hose Assemblies, Synthetic Rubber, Reinforced, Water-And Oil-Resistant, Medium And High Pressure, Nonmagnetic And Regular Service
QPL-2217-9 - Hose Assemblies, Wire-Reinforced Synthetic Rubber, Submarine Rescue Chamber
QPL-22240-17 - Hose And Hose Assemblies, Rubber 6-Inch And 7-Inch, Reattachable Couplings And Adapters
QPL-22706-19 - Duct And Scuff Cover, Pneumatic, Flexible
QPL-24135-41 - Hose, Synthetic Rubber, Wire Reinforced, For Flexible Hose Assemblies General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24136-36 - Hose, Synthetic Rubber,Synthetic Fiber Reinforced For Flexible Hose Assemblies, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24592 - Hose Assembly, Tetrafluoroethylene Tube, Noncollapsible, High Temperature
QPL-25458-3 - Tubing, Rubber, Silicone, For Inflight Feeding
QPL-25579-60 - Hose Assembly, Polytetrafluorethylene, High Temperature, Medium Pressure, General Specification For
QPL-26124-9 - Duct, Pneumatic, Flexible (S/S By Mil-D-22706)
QPL-26499-10 - Hose Assembly, Metal, Flexible, Breathing Oxygen (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-26626-22 - Hose Assembly, Reinforced, Cryogenic, Oxygen (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-26633-20 - Hose Assembly, Polytetrafluoroethylene, Oxygen (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-26686-1 - Hose Assembly, Tetrafluoroethylene Red White Fuming Nitric Acid Resistant
QPL-27267-21 - Hose, Polytetrafluoroethylene, 450 Degrees F, Medium Pressure, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-2815-8 - Hose, Rubber, Diver S Air Supply
QPL-38360-8 - Hose Assembly, Tetrafluoroethylene, High Temperature, 3000 Psi, Hydraulic And Pneumatic
QPL-3992-29 - Hose And Hose Assembly, Rubber: Air And Vacuum Brake, Systems (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-4722-5 - Hose Assembly, High Pressure, Breathing Oxygen
QPL-52471-17 - Hose And Hose Assemblies, Rubber, Hydraulic, Pressure Type, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5593-27 - Hose, Aircraft, Low Pressure, Flexible (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5878-4 - Adapter, Pressure Fuel Servicing, Types A-1 And A-6
QPL-6000-25 - Hose, Rubber (Fuel, Oil, Coolant, Water And Alcohol) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-604-1 - Hose Assembly, Tetraflworethylene, 400 F 3000 Psi Hydraulic Heavy Braid (S/S By Qpl-Sae-As604)
QPL-62028-7 - Hose Air Duct, High Temperature, Flexible, Reinforced
QPL-62165 - Hose And Hose Assembly, Thermoplastic, Hydraulic, Flexible
QPL-7061-6 - Hose, Aircraft, Self-Sealing, Aromatic Fuel
QPL-83298-11 - Hose, Polytetrafluoroethylene, High Temperature High Pressure (3000 Psi), Hydraulic And Pneumatic (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83797/1-5 - Hose, Rubber, Lightweight, Medium Pressure, Fuel And Oil Resistant (S/S By Qpl-83797)
QPL-83797-16 - Hose, Rubber, Lightweight, Medium Pressure, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8788-22 - Hose, Rubber, Hydraulic, High Pressure (3,000 Psi) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8794-26 - Hose, Elastomeric - Hydraulic Fluid, Fuel, And Oil Resistant (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-AS1339-30 - Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 Psi, 400 Degrees F, Lightweight, Hydraulic And Pneumatic (See Notice 2 For Replacement Information)
QPL-AS604-17 - Hose Assembly, Polytetrafluorethylene, Metallic Reinforced, 3000 Psi, 400 Degrees F, Lightweight, Hydraulic (See Notice 2 For Replacement Information)
QPL-ZZ-H-428-13 - Hose; Non-Metallic And Hose; Preformed: (For The Coolant Systems Of Automotive And Other Liquid-Cooled Engines)
QPL-ZZ-H-617-15 - Hose, Rubber: Windshield Wiper
RR-H-651 - Hose, Metallic, Flexible, Interlocking
RR-T-791 - Tubing, Flexible, Aluminum Alloy (See Ww-T-816) (Renumbered Ww-T-816)
UL330 - Hose And Hose Assemblies For Dispensing Flammable Liquids
These requirements cover hose and hose assemblies, including vapor recovery hose and assemblies, for use on dispensing devices for flammable liquids.
WW-H-1053 - ( Images) Hose, Metal (Flexible, Aluminum Alloy, And Corrosion-Resistant And Heat-Resistant Steel) (S/S By A-A-59452)
WW-T-816 - Tubing, Flexible, Aluminum Alloy (S/S By Ww-H-1053)
ZZ-H-00530 - Hose, Sprinkler, Garden Type (Soaker) (S/S By L-H-00520)
ZZ-H-428 - Hose, Non-Metallic And Hose, Preformed: (For The Coolant Systems Of Automotive And Other Liquid-Cooled Engines) (S/S By Sae-J20)
This specification covers preformed (curved) and straight hose; and wire-reinforced hose, for the coolant systems and heaters of automotive and liquid-cooled engines for use in ambient temperatures of -65 deg F.
ZZ-H-461 - Hose And Hose Assembly, Rubber, Gas (Acetylene Hydrogen, Air And Oxygen) (S/S By Rma Ip-7 And Cga-E1)
ZZ-H-466 - ( Images) Hose Assembly, Metal (Rubber Covered), Hydrocarbon Conveying
This specification covers a hose with a metal liner which is covered in rubber or synthetic rubber and encased in a woven cotton jacket and assembled with couplings.
ZZ-H-471 - Hose, Gasoline, Synthetic-Rubber Wire-Stiffened
ZZ-H-496 - Hose, Pneumatic, Braided
ZZ-H-499 - Hose, Pneumatic, Wrapped (S/S By Zz-H-500)
ZZ-H-500 - Hose, Rubber, And Hose Assemblies, Rubber: Pneumatic (Yarn Or Fabric Reinforced) (S/S By A-A-59565)
This specification covers yarn, cord or fabric reinforced rubber pneumatic hose intended for light duty air applications.
ZZ-H-515 - Hose, Rubber (Sleeves, Dredging)
ZZ-H-521 - Hose And Hose Assemblies, Nonmetallic, Spray (S/S By A-A-59613)
This specification covers textile reinforced, nonmetallic spray hose and hose assemblies. These items are to be used with spray equipment and will convey oil emulsions, paint, dope, and solvents.
ZZ-H-541 - Hose, Rubber, Steam (See Mil-H-28596)
ZZ-H-561 - Hose, Rubber, And Hose Assemblies, Rubber, Smooth Bore, Water Suction And Discharge (S/S By A-A-59566)
This specification covers wire-reinforced hose and hose assemblies for use with water pumps. The hose and hose assemblies shall be usable on both suction and discharge sides of the pump.
ZZ-H-601 - Hose And Hose Assemblies, Rubber (Yarn Or Fabric Reinforced) Water Service (S/S By A-A-59567)
This specification covers yarn, cord or fabric reinforced hose and hose assemblies for general use in water service.
ZZ-H-617 - Hose, Rubber, Windshield Wiper
This specification covers one type of hose for use as flexible air or vacuum lines on automotive windshield wiper systems.
ZZ-S-451 - Sleeves, Dredging (S/S By Zz-H-515)
ZZ-T-831 - Tubing, Rubber And Plastic (S/S By A-A-52047)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business