MS8002 Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange

Pages 1 - 2 - 3 - 4 - 5 - 6

INCH-POUND MS8002D

24 September 2003

SUPERSEDING MS8002C

30 June 1985

DETAIL SPECIFICATION SHEET

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE

This specification is approved for use by all

Departments and Agencies of the Department of Defense.

The requirements for acquiring the product described herein shall consist of this specification and

MIL-DTL-25579.

Hose cut-off factor (HCOF) for assembly with class 1 fittings: See table l.

TABLE I. HCOF for assembly with class 1 fittings. 1/

Style 2/ Corrosion resistant steel (CRES)	Fitting ends		HCOF (size vs length) 3/
Style 2/ Corrosion resistant steel (CRES)	1	2	8	10	12	16	20	24
A	MS27053	MS27054	2.16	2.47	2.51	2.91	3.13	3.47
B	MS27053	MS27056	2.18	2.47	3.03	3.28	3.66	4.16
C	MS27053	MS27058	2.14	2.46	3.05	3.35	3.78	4.34
D	MS27059	MS27056	3.04
D	MS27055	MS27056		3.00	3.95	4.12	4.64	5.25
E	MS27059	MS27058	3.00
E	MS27055	MS27058		2.99	3.97	4.19	4.76	5.43
F	MS27060	MS27058	2.52
F	MS27057	MS27058		2.82	3.84	4.10	4.68	5.36
G	MS27059	MS27054	3.02
G	MS27055	MS27054		3.00	3.43	3.75	4.11	4.56
H	MS27060	MS27054	2.54
H	MS27057	MS27054		2.83	3.30	3.66	4.03	4.49
J	MS27060	MS27056	2.56
J	MS27057	MS27056		2.83	3.82	4.03	4.56	5.18

1/ Class 1 fittings, styles A through J, are made from CRES.

2/ For depiction of styles see figure 1.

3/ The HCOF is used in the following calculation to determine the hose length required to produce an assembly of a specific size, style and length: Assembly length - HCOF = Hose length. For example, the hose length required to produce an 25.50 inch length assembly of size 10, style J is calculated as follows: 25.50 - 2.83 = 22.67.

AMSC N/A 1 of 6 FSC 4720

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.