INCH-POUND
MIL-DTL-6000D
20 September 2007
SUPERSEDING
MIL-DTL-6000C
10 December 1998
DETAIL SPECIFICATION
HOSE, RUBBER, AIRCRAFT,
FUEL, OIL, COOLANT, WATER, AND ALCOHOL
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for hose, rubber, aircraft, fuel, oil, coolant,
water, and alcohol, for use in aircraft engine applications.
1.2 Part or Identifying Number (PIN). The PIN consists of the letter M, the basic specification
number, a dash, letter for hose size, a dash, a three digit number for hose length in feet, and a two digit
number for inches.
M
6000
-16
-006
10
Length in inches (less than 10 inches use 09, 08,
07, 06, 05, 04, 03, 02, 01, or 00)
Length in feet (less than 10 feet use 009, 008,
007, 006, 005, 004, 003, 002, or 001)
Basic specification number
M prefix
PIN example: M6000-H-00610 describes a 1-inch inside diameter hose that is 6 feet 10 inches long.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business