MS8003 Hose, Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Flareless-To-Flange

Pages 1 - 2 - 3 - 4 - 5 - 6

INCH-POUND

MS8003D

24 September 2003

SUPERSEDING MS8003C

30 June 1985

DETAIL SPECIFICATION SHEET

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLANGE

This specification is approved for use by all

Departments and Agencies of the Department of Defense.

The requirements for acquiring the product described herein shall consist of this specification and

MIL-DTL-25579.

Hose cut-off factor (HCOF) for assembly with class 1 fittings: See table l.

TABLE I. Hose cut-off factor (HCOF) for assembly with class 1 fittings. 1/

Style 2/ Corrosion resistant steel (CRES)	Fitting ends		HCOF (size vs length) 3/
Style 2/ Corrosion resistant steel (CRES)	1	2	8	10	12	16	20	24
A	MS27381	MS27054	2.39	2.74	2.78	3.19	3.41	3.88
B	MS27381	MS27056	2.41	2.74	3.30	3.56	3.94	4.57
C	MS27381	MS27058	2.37	2.73	3.32	3.63	4.06	4.75
D	MS27384	MS27056	3.20
D	MS27382	MS27056		3.19	4.13	4.31	4.83	5.53
E	MS27384	MS27058	3.16
E	MS27382	MS27058		3.18	4.15	4.38	4.95	5.71
F	MS27385	MS27058	2.52
F	MS27383	MS27058		2.82	3.84	4.10	4.68	5.36
G	MS27384	MS27054	3.18
G	MS27382	MS27054		3.19	3.61	3.94	4.30	4.84
H	MS27385	MS27054	2.54
H	MS27383	MS27054		2.83	3.30	3.66	4.03	4.49
J	MS27385	MS27056	2.56
J	MS27383	MS27056		2.83	3.82	4.03	4.56	5.18

1/ Class 1 fittings, styles A through J, are made from CRES.

2/ For depiction of styles see figure 1.

3/ The HCOF is used in the following calculation to determine the hose length required to produce an assembly of a specific size, style and length: Assembly length - HCOF = Hose length. For example, the hose length required to produce an 30.00 inch length assembly of size 20, style F is calculated as follows: 30.00 - 4.68 = 25.32.

AMSC N/A 1 of 6 FSC 4720

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.