MS8003D
PIN: The PIN for each hose assembly shall include its size code, length, style, protective sleeve type, and the angular alignment between the elbow fittings, as applicable.
Example: The PIN for an 8.250 inch (209.55 mm) length, style F hose assembly with a .500 inch (12.70 mm) tube OD, a fire protective sleeve in accordance with SAE AS1072, and a 30° between the elbow fittings shall be as depicted below.
MS8003 H
08 2 F A
030
Angular alignment between elbow fittings as specified on figure 2 (leave blank for styles A, B, C, G, H, K, M, N, T, and U.
Protective sleeve type (see table III). Leave blank if not required. If a protective sleeve is not required, the PIN shall be as follows: MS8003H082F030.
Style (see table I and figure 1).
Length in eights of an inch from MS8000 series seal end.
Length in inches from MS8000 series seal end.
Size code (see table IV).
Specification number.
Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
CONCLUDING MATERIAL
Custodians: Preparing activity: Army - AV DLA - CC
Navy - AS
Air Force - 99 (Project 4720-0203-000) DLA - CC
Review activities:
Army - AR, AT, EA, MI Navy - MC, SA, SH
Air Force - 71
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business