INCH-POUND MS8007C
24 September 2003
SUPERSEDING MS8007B
30 June 1985
DETAIL SPECIFICATION SHEET
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-25579.
Hose assembly dimensions for style A: See table l.
TABLE I. Hose assembly dimensions for style A. 1/
Fitting ends |
Hose size |
Dimensions 2/ |
||||||
1 |
2 |
A (nom) |
B ( max) |
C (max) |
F (max) |
M (max) |
P (max) |
|
|
Straight |
Straight |
8 |
0.438 |
1.465 |
0.880 |
1.014 |
1.560 |
0.875 |
10 |
0.515 |
1.680 |
0.967 |
1.158 |
1.570 |
1.000 |
||
12 |
0.570 |
1.727 |
1.122 |
1.447 |
1.640 |
1.250 |
||
16 |
0.620 |
2.101 |
1.480 |
1.736 |
1.750 |
1.500 |
||
20 |
0.640 |
2.255 |
1.750 |
2.328 |
1.990 |
1.844 |
||
24 |
0.765 |
2.400 |
2.150 |
2.621 |
2.260 |
2.125 |
||
1/ Style A uses class 1 fittings which are made from corrosion resistant steel (CRES).
2/ Dimensions are shown on figure 1.
FIGURE 1. Style A hose assembly.
AMSC N/A 1 of 16 FSC 4720
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business