INCH-POUND
MIL-DTL-26633E
17 January 2007
SUPERSEDING
MIL-DTL-26633D
23 October 2003
DETAIL SPECIFICATION
HOSE ASSEMBLY, NONCONDUCTIVE,
POLYTETRAFLUOROETHYLENE, OXYGEN
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of hose assembly, nonconductive,
polytetrafluoroethylene, oxygen having a nominal working pressure of 3,000 psig (206.84 bar) in the
operating temperature range from -65°F to +160°F (-53.89°C to 71.11°C).
1.2 Part or Identifying Number (PIN). The definitive specification PIN will be formatted to identify
each item covered by this specification. The PIN format will consist of the letter M, specification number,
length (in feet), and coupling guard (as required) as follows:
26633
-XXXX
X
M
Coupling guard (see 3.3.2.4)
(Required add "A" - not required leave blank)
First 3 digits in inches, fourth digit in 1/8 fractions of an
inch
Specification number
M prefix
Example: M26633-9004A - 75 foot 1/2 inch length hose assembly with coupling guard.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business