MIL-DTL-26633 Hose Assembly, Nonconductive, Polytetrafluoroethylene, OxygenThis specification covers one type of hose assembly, nonconductive, polytetrafluoroethylene, oxygen having a nominal working pressure of 3,000 psig \(206.84 bar\) in the operating temperature range from -65 degrees F to +160 degrees F \(-53.89 degrees C to 71.11 degrees C\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

MIL-DTL-26633E

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this

specification. This section does not include documents in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements

cited in sections 3, 4, and 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE STANDARDS

MIL-A-8625

Anodic Coatings For Aluminum and Aluminum Alloys

MIL-DTL-8789

Fitting End, Attachable, Hydraulic, High Pressure (3,000 psi), General

Specification for

MIL-PRF-83282 -

Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric,

NATO code Number H-537

MIL-PRF-87257 -

Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic

Hydrocarbon Base, Aircraft and Missile

MS28760

Fitting End, Attachable, Hydraulic and Pneumatic, High Pressure Hose

(3,000 PSI) Flared Tube

AN818

Nut, Tube Coupling, Short

(Copies of these documents are available online at https://assist.daps.dla.mil or

https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

AEROSPACE INDUSTRIES ASSOCIATION (AIA)

NAS 847

Caps and Plugs, Protective, Dust and Moisture Seal

(Copies of these documents are available from www.aia-aerospace.com or Aerospace Industries

Association, 1000 Wilson Blvd., Suite 1700, Arlington, Virginia, 22209-3901.)

ASTM INTERNATIONAL

ASTM D792

Plastics, Specific Gravity and Density of, By Displacement

ASTM D2000

Standard Classification System for Rubber Products in

Automotive Applications SAE-J200

ASTM G93

Standard Practice for Cleaning Methods and Cleanliness Levels

for Material and Equipment used in Oxygen-Enriched

Environments

(Copies of these documents are available from https://www.astm.org/ or ASTM International, 100 Barr

Harbor Drive, PO Box C700, West Conshohocken, Pennsylvania, USA 19428-2959.)