INCH-POUND
MIL-DTL-5593E
23 October 2006
SUPERSEDING
MIL-DTL-5593D
8 January 2002
DETAIL SPECIFICATION
HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a low-pressure, flexible hose for use in aircraft applications.
1.2 Part or Identifying Number (PIN). The PIN includes an "M" prefix, general specification number,
followed by a dash, a number for hose size, followed by a dash, a 3 digit number for length, and a single
digit for fractional length.
M
5593-
X-
XXX
X
Fractional length (see 1.2.3)
Length (see 1.2.2)
Diameter (see 1.2.1)
Military specification
M prefix
PIN example: M5593-3-0964 (Size 3 hose 96 1/2 inches long.)
1.2.2 Length of hose. Length of hose and hose assembly are in inches. (Always use 3 digits. Use
leading zeros as required.)
1.2.3 Fractional length. Fractional lengths are in eighths of an inch (0 through 7).
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center, Columbus, Attn: VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business