INCH-POUND
MIL-PRF-370J
7 May 2002
SUPERSEDING
MIL-PRF-370H
01 February 1999
PERFORMANCE SPECIFICATION
HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL
This specification is approved for use by the U.S. Army Tank-automotive and Armaments
Command, Department of the Army and is available for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers standard collapsible and non-collapsible, lightweight
collapsible, and low temperature non-collapsible elastomeric, liquid fuel transfer hose and hose
assemblies.
1.2. Classification. The hose and hose assemblies are of the following types, sizes, classes,
styles, material, and lengths (see 6.2).
1.2.1 Type. The types of hose and hose assemblies are as follows:
Type A
- Collapsible (see 6.5.1).
Type B
- Non-collapsible (see 6.5.2).
Type C
- Collapsible, lightweight (2, 3, 4, and 6-inch (in.) nominal
diameter only).
Type D
- Non-collapsible low temperature.
1.2.2 Size. The sizes of the hose and hose assemblies, as determined by the nominal inside
diameter of the hose, are as follows:
Size 01
0.50 in.
Size 06
2.00 in.
Size 02
0.75 in.
Size 07
2.50 in.
Size 03
1.00 in.
Size 08
3.00 in.
Size 04
1.25 in.
Size 09
4.00 in.
Size 05
1.50 in.
Size 10
6.00 in.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-D/210, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 4720
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business