INCH-POUND
MIL-PRF-83772C
30 September 2013
SUPERSEDING
MIL-PRF-83772B (USAF)
8 JULY 1998
PERFORMANCE SPECIFICATION
HOSE, ASSEMBLY, CRYOGENIC LIQUID, AIRCRAFT SERVICING
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers a non-vacuum hose assembly for servicing aircraft
with cryogenic liquids (liquid oxygen or liquid nitrogen).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of these lists, document users are cautioned that they must meet all specified requirements
of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Non-government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
ASME INTERNATIONAL
ASME-B1.20.1
- Pipe Threads, (Inch) General Purpose
(ASME documents may be obtained online at https://www.asme.org/ or from ASME
International, Three Park Avenue, New York, New York 10016-5990, USA.)
Comments, suggestions, or questions on this document should be addressed to Oklahoma City
Air Logistics Center/ENSDAA, 3001 Staff Drive, Suite 1AB81A, Tinker AFB, OK 73145 or
emailed to af71@tinker.af.mil. Since contact information can change, you may want to verify
the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business