INCH-POUND
MIL-DTL-83298C
22 October 2009
SUPERSEDING
MIL-DTL-83298B
29 September 2000
DETAIL SPECIFICATION
HOSE, CONDUCTIVE POLYTETRAFLUOROETHYLENE TUBE,
HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI),
HYDRAULIC AND PNEUMATIC
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for hose, conductive polytetrafluoroethylene
tube, high-temperature, high pressure (3000 psi), hydraulic and pneumatic (see 6.1).
1.2 Part or Identifying Number (PIN) bulk hose or specific lengths. The hose PIN consists of the
letter M, the specification number, a dash, hose size, a dash, length in feet, a dash, and a B or S for bulk
hose.
83298
-10
-
096
-
S
M
B or S for bulk lengths (see 1.2.2)
Length in feet (see 1.2.1)
Hose size (see 3.4.3)
Specification number
M prefix
PIN example: M83298-10-096-S, describes a 5/8 inch ID hose, 92 continuous feet long.
1.2.1 Length. Specify length in feet using three numbers; use the number zero as place holders as
applicable.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to FluidFlow@dla.mil.
Since contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business