MIL-DTL-83298C
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D4895
-
PTFE Resin Produced from Dispersion
(Copies of these documents are available online at https://www.astm.org or from the ASTM
International, P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
NCSL INTERNATIONAL
NCSL Z540.3
-
Requirements for the Calibration of Measuring and Test Equipment
(Copies of these documents are available online at https://www.ncsli.org or from NCSL International
2995 Wilderness Place, Suite 107 Boulder, Colorado 80301-5404.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 17025
-
General requirements for the competence of testing and calibration
laboratories
(Copies of these documents are available online at https://www.iso.ch or from the International
Organization for Standardization American National Standards Institute, 11 West 42nd Street, 13th Floor,
New York, NY 10036.)
SAE INTERNATIONAL
SAE-AS603
-
Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
SAE-AS611
-
Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning
Methods for
SAE-AS2078
-
Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE-AMS2700
-
Passivation of Corrosion Resistant Steels
(Copies of these documents are available online at https://www.sae.org or from the SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between this document and the references cited herein the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The hose furnished under this specification shall be a product that is authorized by
the qualifying activity for listing on the applicable qualified products list (QPL) before contract award (see
4.4 and 6.3). The hose shall be qualified with approved fittings listed on QPL-83296 from two or more
manufacturers.
3.2 Materials. Materials used shall be as identified herein or as approved by the qualifying activity.
However, materials not specified herein or approved by the qualifying activity, shall be of a quality that will
enable the hose to meet the requirements specified herein.
3.2.1 Hose construction. The hose shall consist of a polytetrafluoroethylene tube with corrosion-
resistant steel reinforcement.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business