INCH-POUND
MIL-DTL-81581/7A
24 July 2006
SUPERSEDING
MIL-H-81581/7(AS)
08 December 1969
DETAIL SPECIFICATION SHEET
HOSE ASSEMBLIES, COMBINED ASSEMBLIES,
HOSE AND COMMUNICATION CABLE
Reactivated after 24 July 2006 and may be used for new and existing designs and
acquisition.
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
The complete requirements for acquiring the hose assemblies described herein shall consist
of this specification sheet, MIL-DTL-81581, and the individual detail specification sheets for the
hoses and cables of the combined assembly.
1.
SCOPE
1.1 Scope. This specification sheet covers the detail requirements for hose assemblies
covered by individual detail specifications and fastened together to make up a combined hose
assembly.
2.
APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following specification forms a part of
this document to the extent specified herein. Unless otherwise specified, the issue of this
document is cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst,
NJ 08733-5100 or emailed to thomas.omara@navy.mil. Since contact information can change,
you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business