MIL-DTL-81581/7A
3.4 Design and construction. The hose assembly shall be in accordance with the general
specification and with the applicable drawing listed on NAVAIR drawing 282AS100.
3.5 Performance. The performance of the combined hose assembly shall be in accordance
with the performance requirements specified in the detail specification sheets for the individual
assemblies making up the combined assembly along with the requirements specified herein.
3.5.1 Visual examination. When subjected to the visual examination specified in 4.2.1, the
combined assembly shall be in accordance with the applicable NAVAIR drawing specified in
Drawing 282AS100. The combined hose and cable assemblies shall be assembled as specified in
the applicable drawing. There shall be no missing, loose, malformed, fractured, or damaged
components. There shall be no incorrect assembling or improper positioning of components.
There shall not be any functioning part that works with difficulty. There shall not be any faulty
workmanship or other irregularities.
4.
VERIFICATION
4.1 Sampling and inspection. Sampling and inspection shall be in accordance with the
applicable detail specification for the individual hoses of the combined assembly and as specified
herein for the combined assembly.
4.1.1 Qualification inspection. The qualification inspection of the combined hose assembly
shall consist of those inspections required for qualification of the individual hoses or cables of
the combined assembly and with the visual examination specified in 3.5.1.
4.1.1.1 Qualification samples. The qualification samples shall consist of four combined
assemblies of the part number contracted for.
4.1.2 First article inspection. The first article inspection of the hose assembly shall consist
of the applicable examinations and tests specified in the general specification with the applicable
procedure as specified herein.
4.1.2.1 First article samples. The first article sample shall consist of four hose assemblies
of each style contracted for.
4.1.3 Conformance inspection. Conformance inspection shall consist of those inspections
required for the conformance inspection of the individual hoses and cables of the combined
assembly and with the visual inspection specified in 3.5.1.
4.1.4 Sample size. The sample size shall be every combined assembly and the acceptance
criteria shall be to reject all defective units.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business