INCH-POUND
MS500077E
17 May 2006 SUPERSEDING MS500077D
16 August 2002
DETAIL SPECIFICATION SHEET
HOSE ASSEMBLY, RUBBER: HYDRAULIC AND PNEUMATIC, MEDIUM PRESSURE, FEMALE 37° FLARED TUBE
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-13531.
NOTES:
1. All undimensioned pictorial representations are for reference purposes only.
2. Metric equivalents are given for information only.
3. Dimension "L" is the defined length of the hose assembly.
4. Hose assemblies shall be specified in the following length increments: Under 24 inches (0.61 m) ½ inch (12.70 mm) increments.
24 to 36 inches (0.61 m to 0.91 m) - 1-inch (25.40 mm) increments.
Over 36 inches (0.91 m)- in not less than 2-inch (50.80 mm) increments.
5. Tolerances:
±1/8 inch (.125 inch) (38.10 mm) for length under 24 inches (0.61 m).
±1/4 inch (.250 inch) (76.20 mm) for the length from 24 to 36 inches (0.61 m to 0.91 m).
±1% for length over 36 inches (0.91 m).
FIGURE 1. General configuration.
AMSC N/A FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business