INCH-POUND
MIL-DTL-8790F
19 April 2007
SUPERSEDING
MIL-DTL-8790E
6 April 2001
DETAIL SPECIFICATION
HOSE ASSEMBLIES, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI,
OPERATING TEMPERATURE RANGE -65°F TO +275°F, FIELD ATTACHABLE
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for hose assemblies, rubber hydraulic, high
pressure 3000 psi, operating temperature range -65°F to +275°F.
1.2 Part or Identifying Number (PIN). The PIN consists of the letters MS, the detail specification
sheet number, a letter for tube OD, three numbers for length, and a number for 1/8 inch fractional lengths.
MS
28759
H
016
4
Length in eighths of an inch (0 through 7)
Length in inches (3 places)
Size code letter (tubing OD) (see MS sheet)
Detail specification sheet number
MS prefix
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center, Columbus, Attn: VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change, you may want to verify the currency
of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business