MIL-DTL-8790F
ASTM INTERNATIONAL
ASTM D380
-
Standard Test Methods for Rubber Hose
(Copies of this documents are available online at https://www.astm.org or from ASTM International, P.O.
Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
NCSL INTERNATIONAL
NCSL Z540.1
-
Calibration Laboratories and Measuring and Test Equipment,
General Requirements
(Copies of this document are available online at https://www.ncsli.org or from NCSL International
2995 Wilderness Place, Suite 107 Boulder, Colorado 80301-5404.)
SAE INTERNATIONAL
SAE-ARP603
-
Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
SAE-ARP908
-
Torque Requirements Installation and Qualification Test, Hose and
Tube Fittings
SAE-AS1933
-
Age Controls for Hose Containing Age-Sensitive Elastomeric
Material
SAE-AS4395
-
Fitting End - Flared Tube Connection, Design Standard
SAE-AS33514
-
Fitting End, Standard Dimensions for Flareless Tube Connection
and Gasket Seal
SAE-J1966
-
Lubricating Oil, Aircraft Piston Engine (Nondispersant Mineral Oil),
Standard
(Copies of these documents are available from https://www.sae.org/ or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheets. In the event of any conflict between the
requirements of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. The hose assemblies described in MS28759, MS28762, MS28920, MS28921, and
MS28924 consisting of MIL-DTL-8788 hose and MIL-DTL-8789 fittings furnished under this specification
shall be products that are authorized by the qualifying activity for listing on the applicable qualified
3.3 Materials. Materials shall be as specified in MIL-DTL-8788 and MIL-DTL-8789.
3.3.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically
advantageous life cycle costs.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business