INCH-POUND
MIL-DTL-8794F
16 April 2007
SUPERSEDING
MIL-DTL-8794E
22 September 2000
DETAIL SPECIFICATION
HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers hose, synthetic rubber - hydraulic fluid, fuel, and oil resistant.
1.2 Part or Identifying Number (PIN). The hose PIN consists of the letter M, the basic specification
number, hose size in dash number, applicable code, hose length, a dash, and hose length tolerance in
1/8th fraction of an inch or the letter B or S for bulk hose.
8794 -
10
-
096
-
6
M
Fractional lengths in 1/8 inch increments (0 thru 7)
see 1.2.1.2 or B or S for bulk lengths see 1.2.1.3
Length in inches or feet (see 1.2.1.1 or 1.2.1.3)
Specification number
M prefix
PIN examples:
M8794-8-014-5 (size 8 hose 14 5/8 inches long)
M8794-6-050-B (size 6 hose 50 feet bulk sizes)
M8794-4-025-S (size 4 hose 25 feet specific length)
1.2.1 Hose lengths.
1.2.1.1 Lengths of hose. Lengths of hose are represented by inches unless bulk hose is required
(see 1.2.1.3).
1.2.1.2 Fractions. Fractions are expressed in 1/8 inch increments (0 thru 7). Not applicable to bulk
or specific hose lengths.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business