MIL-DTL-8794F
3.5.16 Leakage. Hose assemblies when tested as specified in 4.8.19, shall have no leakage of the
hose or from the hose-to-adapter interface, and no seepage back through the fabric that might produce
separation or swelling of the hose, when subjected to 70 percent of the burst pressure specified in table
II.
3.6 Marking. The outer cover of bulk hose or hose in hose assemblies shall be marked with,
continuous yellow stripe. As a minimum, the hose cover material shall be marked with the following
information at intervals of not more than 12 inches (305 mm).
PIN as specified in 1.2, length designator may be omitted.
a.
b.
Cure date in quarter and year such as 4Q06 for fourth quarter 2006.
c.
CAGE code.
d.
Manufacturer's name or trademark.
(Example: "MIL-DTL-8794-6-2Q06-00TBD" designates hose size -6 manufactured during the second
quarter of calendar year 2006 by the manufacturer whose CAGE Code is 00TBD.)
3.6.1 Marking color. The marking color shall be yellow conforming to FED-STD-595/13538. The
marking shall be a water resistant, gasoline resistant, and oil-resistant.
3.7 Workmanship. Hose shall be manufactured and processed in such a manner as to be uniform in
quality and shall be free from foreign material and other defects that will affect life, serviceability, strength,
assembly or durability, see table IV. Workmanship shall be such as to enable the hose to meet the
applicable performance requirements of this specification.
3.8 Age limit. The age limit of bulk hose and hose assemblies covered by this specification and
furnished for use by the Government shall not exceed the limits in accordance with SAE AS1933.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business