MIL-DTL-8794F
4.4 Hose assemblies for hose testing. The hose assemblies used for hose testing shall be
assembled using adapters in accordance with MIL-DTL-5070 of the applicable size in accordance with
the adapter manufacturer's instructions (see MIL-DTL-8795 and MS28741). Hose assemblies shall be
examined to verify that there has been no degradation of the hose or adapters resulting from the
assembly process. Unless otherwise specified, hose assembly lengths shall be as specified in table II.
4.5 Qualification inspection. Qualification inspection shall be performed at a laboratory acceptable to the
qualifying activity on sample units produced with equipment and procedures used in production. Each
nominal hose size (ID) shall be qualified individually.
4.5.1 Samples for qualification. Samples for qualification shall be representative of the products
proposed to be furnished to the Government. Samples shall be of one type and nominal size of hose and
shall be of the quantity and length specified in the applicable test method.
4.5.2 Qualification inspection routine. All samples shall be subjected to qualification testing as specified
in table V and the test sequence as specified in table VI.
4.5.3 Disposition of test specimens. Test specimens that have been subjected to qualification
testing shall not be delivered on a contract or purchase order.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business