INCH-POUND
MIL-DTL-52471/10B
4 December 2008
SUPERSEDING
MIL-DTL-52471/10A
27 April 1998
DETAIL SPECIFICATION SHEET
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE,
TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-52471.
FIGURE 1. Hose assembly, fitting identification.
Hose operating pressure. The hose operating pressure shall be as specified in table I.
TABLE I. Hose operating pressure. 1/ 2/
Maximum
Minimum
Hose ID
operating
Hose ID
burst
pressure
dash
pressure
number
inch
inch
mm
psi
Mpa
psi
MPa
fraction decimal
-8
1/2
.500
12.70 4000
28
16,000
110
-12
3/4
.750
19.05 4000
28
16,000
110
-16
1
1.00
25.40 4000
28
16,000
110
1/ Dimensions are in inches.
2/ Metric equivalents are given for information only.
Hose assembly code number. The purpose of this slash sheet is to provide hose assembly code
numbers for determining the hose diameter, fitting X, fitting Y, and bend angles (when applicable) as
shown in tables II through IV. The bend angles are called "style codes" and consist of hose assembly
styles as explained in MIL-DTL-52471.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business