INCH-POUND
MIL-DTL-20176G
7 November 1997
SUPERSEDING
MIL-H-20176F
19 May 1989
DETAIL SPECIFICATION
HOSE AND HOSE ASSEMBLY, RUBBER, SMOOTH BORE,
LIGHT-WEIGHT SEWAGE DISCHARGE AND OILY WASTE DISCHARGE
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers smooth bore, sewage discharge, and oily waste discharge
rubber hose and hose assemblies.
1.2 Classification.
1.2.1 Types, classes, and sizes. Sewage hose and oily waste will be of the following types,
classes, and sizes, as specified (see 6.2):
Type I - Sewage hose.
Size 1.5 - 1.5 inches (38.10 millimetre (mm)) nominal inside diameter (id).
Size 2.5 - 2.5 inches (63.50 mm) nominal id.
Size 4.0 - 4.0 inches (101.60 mm) nominal id.
Type II - Oily waste hose.
Size 2.5 - 2.5 inches (63.50 mm) nominal id.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data
which may improve this document should be sent to: Commanding Officer (Code 15E2), Naval
Construction Battalion Center, 1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business