INCH-POUND
MIL-DTL-13444H
27 March 2006
SUPERSEDING
MIL-DTL-13444G
1 June 1999
DETAIL SPECIFICATION
HOSE AND HOSE ASSEMBLIES, RUBBER: FUEL AND OIL
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers hose and hose assemblies, rubber: fuel and oil. The hoses
described in this specification consist of two types of fuel and oil hose, hose assemblies for military
engine installations and other uses (see 6.1).
1.2 Part or Identifying Number (PIN). The PIN consists of the letters MS, the basic specification
number, a forward slash, a detail specification number, a letter, a two digit number, a three digit number,
a single digit number, and a letter.
MS
52103
X
XX
XXX
X
X
Type of fitting (see 1.2.6)
Fractional length in eights of
an inch (0 thru 7) (see 1.2.5)
Length of hose assembly in
inches (see 1.2.4)
Dash number from MS
sheet (see 1.2.3)
Fitting material (see 1.2.2)
Basic specification number
(see 1.2.1)
MS prefix
Example: MS52103Z080125R
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center, Columbus, Attn: VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change you, may want to verify the currency
of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business