For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-13444 Hose And Hose Assemblies, Rubber: Fuel And OilThis specification covers hose and hose assemblies, rubber: fuel and oil. The hoses described in this specification consist of two types of fuel and oil hose, hose assemblies for military engine installations and other uses \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11


. . . . . . . .
MIL-DTL-13444H
1.2.1 Basic specification.
MS52103 (type III)
MS52104 (type I)
1.2.2 Fitting material. Reference MS52103 and MS52104 for applicable fitting material and plating
available.
Z - Carbon steel, zinc plated.
A - Carbon steel, cadmium plated.
B - Brass.
C- Carbon steel
S - Corrosion resistant steel.
1.2.3 Dash number. Dash number from MS sheet defines the hose inside diameter (I.D), hose
outside diameter (O.D.) and fitting thread.
1.2.4 Length of hose assembly. Length of hose assembly in inches (3 digits).
1.2.5 Fractional length. Fractional length in eights of an inch (0 through 7).
1.2.6 Type of fitting.
R - Reusable.
P - Permanent.
1.3 Classification. Hose and hose assemblies consist of the following types and nominal inside
diameter (I.D.) sizes as specified in MS52103 and MS52104 (see 3.1 and 6.2):
Type I
-
Single fabric braid reinforcement.
Type III
-
Single fabric and single wire braid reinforcement covered with synthetic-
rubber-impregnated fabric braid, medium pressure and high temperature
resistant.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3, 4, or 5, of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
2



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.