MS8005D
Hose assembly size code: See table XIV.
TABLE XIV. Hose assembly size code.
Size |
Reference tube OD |
Size code |
3/4 |
1/ |
B |
4 |
0.250 |
E |
5 |
0.313 |
F |
6 |
0.375 |
G |
8 |
0.500 |
H |
10 |
0.625 |
J |
12 |
0.750 |
K |
16 |
1.000 |
M |
20 |
1.250 |
N |
24 |
1.500 |
P |
1/ Size 3/4 hose assembly consists of a size 4 tube OD hose
assembled with size 3 tube OD fittings.
REQUIREMENTS:
Dimensions: Unless otherwise specified, all dimensions are in inches. Dimensions "E (max)" and
"J (max)" are installation dimensions and not design dimensions.
Fittings: The swivel nut and cone seat shall mate with SAE AS4395 fitting. The swivel nut threads shall be in accordance with SAE AS8879.
Elbow fittings: The ovality of the circular cross section within the angle of the bend of the end fitting elbow shall not exceed 7.5% of the nominal tubing OD.
Assembly classification: Class 1 and class 2 hose assemblies, as specified in MIL-DTL-25579, have been incorporated into the Part or Identifying Number (PIN) as a part of styles.
Angular alignment: Hose assemblies with elbow fittings on each end shall have the angular orientation between the elbows measured counter-clockwise from the centerline of the nearest fitting, positioned at six-o'clock, to the centerline of the other fitting (see figure 13). When applicable, the angular alignment shall be expressed in three digits and specified in the PIN.
Protective sleeve: If required, the hose assembly shall include a protective sleeve (see table XIII) and its code shall be included in the PIN. Fire protective sleeve shall be subjected to testing in accordance with MIL-DTL-25579.
Assembly length: Hose assembly shall be furnished in lengths as specified in the contract or purchase order (see MIL-DTL-25579); however, tolerances on the length of each hose assembly shall be as follows:
a. ±1/8 inch for lengths under 18 inches.
b. ±1/4 inch for lengths from 18 inches to 36 inches. c. ±1/2 inch for lengths from 36 inches to 50 inches. d. ±1% for lengths over 50 inches.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business