MIL-DTL-3992F
4.4.6.1 Disposition of samples. First article samples shall be furnished to the Government as directed
by the contracting officer (see 6.2).
4.5. Conformance inspection.
4.5.1 Conformance inspection for qualified items.
4.5.1.1. Individual inspection. Individual inspection shall consist of the inspections specified in table
X in the order shown.
4.5.1.2 Individual inspections sampling plan.
4.5.1.2.1 Individual inspection tests (type I). Individual inspection test specified in table X shall be
performed on a production lot basis. All defects shall be removed and not supplied as qualified product.
4.5.2 Sampling and periodic inspection (type I). Sampling and periodic inspections shall consist of
the inspections specified in table XI and shall be made on test samples which have been subjected to
and passed the individual inspections (see table X).
4.5.3 Individual, sampling, and periodic inspection for first article (type II). For manufacturers that
have successfully passed first article inspections and are continuously producing type II hose and hose
assemblies to this specification on going inspections shall consist of individual inspections (see table X)
and sampling and periodic inspections (see table XI). If first article is waived due to prior successful first
article inspection the individual inspections and sampling and periodic inspections shall be the
manufactures in-house inspection procedures.
TABLE X. Individual inspections. 1/
Requirement
Inspection
Inspections
paragraph
paragraph
Visual inspection
Configuration
Proof pressure
1/ 100 percent inspection of bulk hose length and each hose assembly. Visual
inspection and configuration inspection may be performed at an inspection plan
approved in writing by the qualifying activity.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business