MIL-DTL-83797C
1.2.1 Bulk hose lengths. Lengths of bulk hose are represented by inches.
1.2.1.1 Lengths of hose. Lengths of hose are represented by inches and fractions in 1/8 inch
increments, unless bulk hose is required. Not used with bulk hose designators (see 1.2.1.3).
1.2.1.2 Fractions. Fractions are expressed in 1/8 inch increments (1 thru 7). Not applicable to bulk
hose lengths.
1.2.1.3 Bulk hose lengths. Bulk hose lengths are represented by the letter R or S. Bulk lengths are
in increments of 20 feet or more (see 3.4.2.1). The S designator is used to define specific lengths in feet
(see 3.4.2.2).
Note: For the inch designator insert the number zero in front of the designator for lengths less than
100 inches.
Examples:
When 12 7/8 inch length is required the designator is: 012-7
When 96 inches is required the designator is: 096
When 96 feet total length is required the designator is: 096-R
When 30 feet continuous length is required with a 1% tolerance the designator is: 030-S
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements documents cited in sections
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-5624
-
Turbine fuel, Aviation, Grades JP-4, JP-5, and JP-5/JP-8 ST
MIL-PRF-5606
-
Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance
MIL-PRF-7808
-
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base
MIL-PRF-87257
-
Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic
Hydrocarbon Base, Aircraft and Missile
MIL-DTL-83133
-
Turbine Fuels, Aviation, Kerosene Types, NATO F-34 (JP-8), and
NATO F-35, and JP-8+100
MIL-PRF-83282
-
Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base,
Aircraft NATO Code Number H-537
MIL-DTL-83796
-
Hose Assembly, Rubber, Lightweight, Medium Pressure, General
Specification for
MIL-DTL-83796/1
-
Hose Assembly, Rubber, Lightweight, Medium Pressure, Field
Attachable End Fittings, Flare to Flare
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business