MS8009C
NOTE: Angular alignment shall be measured in degrees with a tolerance of ±2°.
FIGURE 13. Measurement of angular alignment between elbow fittings.
PIN: The PIN for each hose assembly shall include its size code, length, style, protective sleeve type, and the angular alignment between the elbow fittings, as applicable.
Example: The PIN for an 8.250 inch (209.55 mm) length, style F hose assembly with a 0.500 inch (12.70 mm) tube OD, a fire protective sleeve in accordance with SAE AS1072, and a 30° between the elbow fittings shall be as follows:
MS8009 H
08 2 F A
030
Angular alignment between elbow fittings as specified on figure 13 (leave blank for styles A, B, C, G, H, and J.
Protective sleeve type (see table XIII). Leave blank if not required. If a protective sleeve is not required, the PIN shall be as follows: MS8009H082F030.
Style (see table VI and figure 6).
Length in eights of an inch.
Length in inches.
Size code (see table XIV).
Specification number.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business