MIL-DTL-26666 Hose Assembly, Pneumatic, High PressureThis specification covers the requirements for a hose assembly, pneumatic, high pressure having a nominal working pressure of 4,000 psig \(275.79 bar\) in the operating temperature range of -65 to +160 Degrees F \(-53.89 Degrees C to 71.11 Degrees C\). DO NOT USE FOR OXYGEN. DO NOT USE ON AIRCRAFT.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-26666G

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements

documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issue of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE STANDARD

MIL-STD-889

Dissimilar Metals

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,

Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document to the

extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

ASTM INTERNATIONAL

ASTM D1248

Polyethylene Plastics Extrusion Materials for Wire and Cable

ASTM D2000

Rubber Products in Automotive Applications

(Copies of these documents are available online at https://www.astm.org or from the ASTM

International, P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)

SAE INTERNATIONAL

SAE AMS 2700

Passivation of Corrosion Resistant Steels

SAE ARP908

Hose and Tube Fitting, Installation and Qualification Test Torque

Requirements

SAE AS4395

Tube Connection, Fitting End-Flared, Design Standard

SAE AS5175

Nut, Coupling, Flared

SAE AS8879

Screw Threads, Controlled Radius Root with Increased Minor

Diameter, General Specification for

(Copies of these documents are available online at https://www.sae.org or from the SAE World

Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)

2.4 Order of precedence. In the event of a conflict between this text of this document and the

references cited herein, the text of this document takes precedence. Nothing in this document, however,

supersedes applicable laws and regulations unless a specific exemption has been obtained.