MIL-DTL-17902G(SH)
1.2.1.2 Hose and hose assembly type. Type should be identified by a two-letter symbol as shown in table II
(see 6.2).
TABLE II. Hose type designation.
Symbol
Hose type/configuration
CCA
Collapsible hose assembly
CCH
Collapsible hose only
NCA
Noncollapsible hose assembly
NCH
Noncollapsible hose only
1.2.1.3 Hose fitting type. Type should be identified by a two-letter symbol as shown in table III (see 6.2).
TABLE III. Fitting type designation.
Symbol
Fitting type
FM
Fitting, male
FF
Fitting, female
1.2.1.4 Hose and hose assembly length. Length should be identified by a two-number symbol as shown in
table IV.
TABLE IV. Hose and hose assembly length.
Length (feet) (nominal) (±1%
Symbol
of nominal length)
25
25
50
50
75
75
Unless otherwise specified (see 6.2), the length of bulk hose or hose assemblies should be 50 feet, nominal.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
FED-STD-162
-
Hose, Rubber, Visual Inspection Guide for
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business