MIL-DTL-13444H
4.5.5.1 Test plans. Test plans shall be prepared and submitted in accordance with the requirements
of the qualification activity. The method of qualification proposed by the contractor is subject to the
approval of the qualification activity. Manufacturers shall discuss with the qualifying activity the test
specimens and test plans. These plans shall state specifically the component requirement to be verified
during the test, such as test fixtures, setup, conditions, and identification of the successor failure criteria
shall be included as appropriate.
4.5.5.2 Qualification reports. Qualification reports shall be submitted in accordance with requirements
of the qualifying activity. The visual and mechanical inspection and the hose assembly fitting inspection
will be 100% unless another sampling plan is approved in writing by the qualifying activity.
4.6 Conformance inspection. Applicable to both hose and hose assemblies.
4.6.1 Individual inspection. Individual inspection shall consist of the inspections specified in table VII
in the order shown.
TABLE VII. Individual inspections.
Requirement
Inspection
Inspections
paragraph
paragraph
Visual and mechanical inspection
and 3.9
Hose assembly fittings 1/
Proof pressure 2/
1/ 100 percent inspection.
2/ 100 percent inspection of bulk hose length and each hose
assembly.
4.6.2. Individual inspections sampling plan. Individual inspection tests specified in table VII shall be
performed on a production lot basis. Random samples shall be selected to form an inspection lot. If one
or more defects are found in the inspection lot, then the production lot shall be screened for that
particular defect and defects removed. An inspection lot shall be selected from the production lot and all
group A tests again performed. If one or more defects are found in the second inspection lot, the
production lot shall be rejected and shall not be supplied to this specification.
4.6.3 Sampling inspection lot.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business