MS500083E
TABLE I. Hose and fitting thread sizes.
Dash number |
Hose ID reference |
Hose OD reference |
Fitting thread reference |
|||||
Class A |
Class B |
|||||||
Permanent fittings |
Reuseable fittings |
Inches |
mm |
Inches |
mm |
Inches |
mm |
|
3 4 6 8 10 12 16 20 24 32 |
33 34 35 36 37 38 39 40 41 42 |
.187 .250 .375 .500 .635 .750 1.000 1.250 1.500 2.000 |
5.0 6.5 9.5 12.5 15.9 19.0 25.5 32.0 38.0 51.0 |
.625 .687 .843 .968 1.093 1.250 1.562 2.000 2.250 2.750 |
15.9 17.5 21.4 24.6 27.8 31.8 39.7 51.0 57.1 70.0 |
.535 .593 .754 .874 1.008 1.156 1.500 1.867 2.148 2.648 |
13.6 15.0 19.0 22.2 25.6 29.4 38.1 47.4 54.5 67.3 |
3/8-24 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 |
REQUIREMENTS
Design and configuration: See figure 1 and table I. Hose material: Type II or III, class A or B.
Hose and fittings shall be in accordance with MIL-DTL-13531.
Fittings: Dimensions in accordance with SAE-J516 female 37°, flared type, swivel.
Fitting material and finish shall be in accordance with MIL-DTL-13531 and designated as follows: A - Steel - cadmium plated
S - Stainless steel.
Z - Steel - zinc plated. (Zinc plating is not for use in aircraft).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business