MS28759 Hose Assembly, Rubber, Hydraulic, 3,000 Psi, Straight To Straight, Flared Tube Field Attachable

Pages 1 - 2 - 3

MS28759D

NOTES:

1.  Dimensions are in inches.

2.  Metric equivalents are for information only.

3.  Hose assembly lengths (L) shall be as specified with the following tolerances:

a.  Under 18 inches (0.46 m) long (± .13 inch (3.3 mm)).

b.  Over 18 to 36 inches (0.46 to 0.91 m) long (± .25 inch (6.4 mm)). c.  Over 36 to 50 inches long (0.91 to 1.27 m) (± .50 inch (12.7 mm)). d.  Over 50 inches long (Tolerance ± 1%).

4.  Dash size number refers to the nominal outside diameter of the passageway in sixteenths (1/16)

of an inch.  A dash 8 (-8) has an outside diameter of one-half inch (8/16).

5.  Part or Identifying Number (PIN).

FIGURE 1.  Hose assembly, flared tube dimensions and configuration - Continued.

REQUIREMENTS:

Hose assemblies shall be as specified on figure 1.

The hose assembly identification shall be marked in accordance with MIL-DTL-8790. PIN example:

MS            28759         -8           016         4

Length in eighths of an inch (0 through 7)

                        Length in inches (3 places)

Dash size number (see figure 1)

Specification number

MS prefix

Example of a PIN:  MS28759-80164.  MS28759 hose assembly, .500 inch (1/2 inch) passageway diameter, length 16.500 inches.

For supersession data, see table I.

TABLE I.  Supersession table.

2