MIL-PRF-11588H
TABLE V. Classification of inspections.
First
Conformance
Title
Requirement
Inspection
article
tests
Hydrostatic pressure
3.5.1
4.5.3
X
X
Length change and twist
3.5.2
4.5.4
X
X
Burst pressure
3.5.3
4.5.5
X
Tensile strength, elongation
3.5.4, 3.5.5,
4.5.6
X
X
and adhesion
and 3.5.6
Volume increase
3.5.7
4.5.7
X
Low temperature flexibility
3.5.8
4.5.8
X
Existent gum content
3.5.9
4.5.9
X
Continuity
3.5.10
4.5.10
X
X
4.3 Conformance inspection. Conformance inspection shall include the examinations of
4.4 and tests of 4.5.3, 4.5.4, 4.5.6, and 4.5.10.
4.4 Examination.
4.4.1 Sampling. Sampling for inspection lot for conformance inspection shall be selected
in accordance with ASQ Z1.4. Any redesign or modification of the contractor s standard to
comply with specified requirements shall receive particular attention for adequacy and suitability.
This element of inspection shall encompass all visual examinations and dimensional
measurements of requirements of 3.3, 3.3.1, 3.4, 3.4.3, 3.4.4, 3.4.5, 3.5.11, and as listed in table
IV. Noncompliance with any specified requirements or presence of one or more defects
preventing or lessening maximum efficiency shall constitute cause for rejection.
4.5 Method of inspection.
4.5.1 Materials. Conformance to 3.2 shall be determined by inspection of contractor
records providing proof or certification that materials conform to requirements. Applicable
records shall include drawings, specifications, design data, receiving inspection records,
processing and quality control standards, vendor catalogs and certifications, industry standards,
test reports, and rating data.
4.5.2 Defects. Conformance to 3.3, 3.3.1, 3.4, 3.4.3, 3.4.4, 3.4.5, 3.5.11, and shall be
determined by examination for the defects listed in table IV. Examination shall be visual, tactile,
or by measurement with SIE.
4.5.2.1 Ozone resistance. Samples of the cover shall be subjected to ozone resistance
tests ASTM D1149, Method B, Procedure B1. On completion of the test, the samples shall be
examined for visible cracking under a 7X lens.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business