MIL-DTL-8788F
3.10.1 Marking color. The marking color shall be yellow in accordance with FED-STD-595/13538.
The marking shall be a water resistant, gasoline resistant, and oil-resistant.
3.10.2 Anti-counterfeiting protection. All qualified manufacturers shall establish proprietary measures
to authenticate their products when necessary see 6.2. If required, this proprietary information shall be
released only to the quality assurance department of the final procuring activity.
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are classified as
follows:
a. Qualification inspection (see 4.4).
b. Conformance inspection (see 4.5).
4.2 Test equipment and inspection facilities. Test and measuring equipment and inspection facilities
of sufficient accuracy, quality and quantity to permit performance of the required inspection shall be used.
The establishment and the maintenance of a calibration system to control the accuracy of all tests and
measuring equipment shall be in accordance with ISO 17025 and NCSL Z540.3 as applicable.
4.3 Inspection conditions. Unless otherwise specified, all required inspections shall be performed in
accordance with the test conditions specified in 4.6.
4.4 Qualification inspection. Qualification inspection shall be performed at a laboratory acceptable to
the Government qualifying activity (see 6.3) on sample units produced with equipment and procedures
used in production.
4.4.1 Samples for qualification. Qualification samples shall be representative of the products
proposed to be furnished to this specification. Sample sizes are specified in the applicable test methods
and table III. Except for visual and mechanical inspection and proof pressure, at the discretion of the
manufacture, hose or hose assembly samples maybe subjected to multiple tests.
4.4.1.1 Hose assembly. When a hose assembly is required for a qualification inspection each hose
assembly shall consist of a hose as specified herein assembled with fittings from two different
manufacturers qualified to MIL-DTL-8789.
4.4.2 Qualification inspection routine. Samples shall be subjected to qualification inspection specified
in table III.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business