MIL-DTL-29210E
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
FED-STD-162
-
Hose, Rubber, Visual Inspection Guide For
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM INTERNATIONAL
ASTM A47/A47M
-
Standard Specification for Ferritic Malleable Iron Castings
ASTM A48/A48M
-
Standard Specification for Gray Iron Castings
ASTM A536
-
Standard Specification for Ductile Iron Castings
ASTM D380
-
Standard Test Methods for Rubber Hose
ASTM A751
-
Standard Test Methods, Practices, and Terminology for Chemical
Analysis of Steel Products
ASTM D1149
-
Rubber Deterioration - Surface Ozone Cracking in a Chamber
(Copies of these documents are available online at https://www.astm.org or from the ASTM
International, P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SAE INTERNATIONAL
SAE-AS1933
-
Age Controls for Hose Containing Age-Sensitive Elastomeric Material
(Copies of these documents are available from https://www.sae.org/ or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between this document and the references cited herein the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.2.
3.2 Materials. Materials used shall be free from defects which would adversely affect the
performance or maintainability of individual components or of the overall assembly. Materials not
specified herein shall be of the same quality used for the intended purpose in commercial practice.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business