INCH-POUND
MIL-PRF-26626F
05 February 2008
SUPERSEDING
MIL-PRF-26626E
23 June 1998
PERFORMANCE SPECIFICATION
HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers reinforced cryogenic hose assemblies with flared
tube style fittings.
1.2 Part or identifying number (PIN). The PIN to be used for the hose assembly acquired
to this specification are created as follows.
M 22626 -X -XXXX
Dash number, length (L) (see figure I)
Dash number, the numeric portion of the
AN818 fitting (see figure I)
Specification number
M prefix
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to: Oklahoma City
Air Logistics Center/ENEP, 3001 Staff Drive, Suite 2AG-68A, Tinker AFB, OK 73145-3036 or
e-mailed to ocalc.enrs.sma@tinker.af.mil. Since contact information can change, you may want
to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil/.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business