MIL-PRF-87961B
d. Manufacturer's CAGE code.
e. Manufacturer's part number.
3.6 Interchangeability. All parts having the same manufacturer's part number shall be
functionally and dimensionally interchangeable.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. First inspection shall be performed on 3 hoses and shall
consist of all tests in section 4.6.
4.3 Conformance inspection. Conformance inspection shall consist of the individual
tests in 4.3.1 and the sampling tests in 4.3.2.
4.3.1 Individual tests. Each hose shall be subjected to the following tests:
a. Examination (see 4.6.1)
b. Delamination (see 4.6.5)
c. Leakage (see 4.6.7)
4.3.2 Sampling tests. Sampling tests shall be performed in accordance with the guidance
in ASQC-Z1.4. Sampling shall begin at the normal inspection level (see 6.7). The sampling tests
are:
a.
Odor (see 4.6.2)
b.
Cleanliness (see 4.6.3)
c.
Flexibility (see 4.6.4)
d.
Elongation (see 4.6.6)
4.4 Test conditions. Unless otherwise specified in the individual test description, all
tests shall be performed under the following test conditions:
a. Ambient atmospheric conditions.
b. First article tests shall be performed using oxygen conforming to Type I of SAE-
AS8010. Individual tests shall be performed using oxygen conforming to Type I of SAE-AS8010
or water pumped nitrogen conforming to Type I, Class 1, Grade B of A-A-59503 and A-A-
59155.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business