MIL-DTL-81581/6B
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ-Z1.4
-
Sampling Procedures and Tables for Inspection by
Attributes
(Copies of this document are available from the American Society for Quality, P.O. Box
3005, Milwaukee, WI 53201-4606, or https://www.asq.org/
2.3 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein (except for related specification sheets), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Requirements. Requirements shall be in accordance with MIL-DTL-81581 and as
specified herein. The requirements of this detail specification shall be additional requirements
for hose assemblies acquired as kits, where the integrity of coupled assemblies must be
established and where the interchangeability of hose assemblies is imperative. The requirements
for tests and inspections required herein, which are not covered in the general specification or
this document, shall be covered in the applicable detail specifications for the following hose
assemblies:
a. Drawings 285AS100, 286AS100, 287AS100, and 288AS100 (see MIL-DTL-
81581/1).
b. Drawings 33D1349 and 63A88C2 (see MIL-DTL-81581/2).
3.2 Qualification. The hose kit or hose furnished under this specification shall be a product
that is authorized by the qualifying activity for listing on the applicable qualified products list
before contract award (see 4.1.1). Qualification shall be in accordance with groups as listed on
NAVIAR Index Drawing 281AS100. Qualification approval of any individual hose kit or hose
listed within a group shall automatically qualify a manufacturer for all other items listed with the
group provided the conditions set forth in MIL-DTL-81581, 6.3 Qualification, are complied
with.
3.3 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection (see 4.1.2).
3.4 Design and construction. The hose assembly shall be in accordance with the general
specification and with the applicable drawing listed in the applicable group in Drawing
281AS100.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business