MIL-DTL-26499 Hose Assembly, Metal, Flexible, Breathing OxygenThis specification covers one type of metal flexible hose assembly with a nominal working pressure of 2,400 psi \(165.47 bar\) in the operating temperature range from -65 degrees F to +160 degrees F \(-53.89 degrees C to +71.11 degrees C\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

MIL-DTL-26499E

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements

documents cited in sections 3, 4 or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

FEDERAL SPECIFICATIONS

QQ-B-654

Brazing Alloys, Silver

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,

Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, issues of these documents are those cited in the solicitation

or contract.

Compressed Gas Association, Inc.

CGA V-1

Compressed Gas Association Standard for Compressed Gas Cylinder

Valve Outlet and Inlet Connections.

(Copies of these documents are available from www.cganet.com or Compressed Gas Association

Customer Service, 4221 Walney Road, 5th Floor, Chantilly, VA 20151-2923.).

ASTM INTERNATIOINAL

ASTM B16/B 16M

Standard Specification for Free-Cutting Brass Rod, Bar and

Shapes for Use in Screw Machines

ASTM G93

Standard Practice for Cleaning Methods and Cleanliness Levels

for Material and Equipment used in Oxygen-Enriched

Environments

(Copies of these documents are available online at https://www.astm.org or from the ASTM

International, P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)

SAE INTERNATIONAL

SAE AS611

Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning Methods

For

(Copies of these documents are available online at https://www.sae.org or from the SAE World

Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)