A-A-52554
|
Size 1 |
0.50-in |
-(inside diameter |
|
Size 2 |
0.75-in |
|
|
Size 3 |
1.00-in |
|
|
Size 4 |
0.25-in |
|
|
Size 5 |
1.50-in |
|
|
Size 6 |
2.00-in |
|
|
Size 7 |
2.50-in |
|
|
Size 8 |
3.00-in |
|
|
Size 9 |
4.00-in |
|
|
Size 10 |
6.00-in |
|
Class 0 |
Bulk Hose (Without Fittings) |
|
Class 1 |
Male Fitting On One End and Female Fitting On Other End. |
|
Class 2 |
Male Fitting Both Ends. |
|
Class 3 |
Female Fittings Both ends |
|
Style 0 |
Bulk Hose (Without Fittings) |
|
Style A |
Banded Shank (Reattachable) |
|
Style B |
Compression (Reattachable-Threaded) |
|
Style C |
Internal Expanded (One Time Threaded). |
3. SALIENT CHARACTERISTICS
3.1 Description. The hose and hose assemblies shall consist of a tube, one or more plies of reinforcement, and a cover, for use with liquid hydrocarbon fuels.
3.2 Material. The materials used for the hose and hose assemblies are to be produced to comply with the provisions of this description, and meet with deterioration and corrosion resistance requirements. The use of recovered material made in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met. Materials not specified shall be selected by the contractor and shall be subjected to all provisions of this description.
3.2.1 Tube. The basic material for the tube shall be a synthetic compound utilizing a copolymer product of butadiene and acrylonitrile or other synthetic fuel resistant elastomer that shall comply with all requirements of this CID.
3.2.2 Cover. The cover shall be elastomer compounded for fuel, oil, hydrolytic and ultraviolet stability and ozone resistance that complies with all requirements of this CID.
3.3 Reinforcement and static bond.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business