A-A-520470
2.3 Length. Lengths should be 3 feet ±1 inch by default or as needed.
2.4 Color. Color as follows:
|
Color type |
Material PIN code |
Any color |
A |
Black |
B |
Clear |
C |
Translucent, amber |
T |
3. SALIENT CHARACTERISTICS.
3.1 Interface and physical dimensions. Tubing, nonmetallic (rubber and plastic) supplied to this CI0 shall be as specified herein.
3.2 0escription. The tubing shall be manufactured for use in laboratory procedures and special uses where softness and high purity are required and when electrical conductivity may be required. The physical properties shall be as shown in table I.
3.2.1 Specific gravity. The tubing shall have a specific gravity as defined in table I when tested in accordance with ASTM 0792.
3.2.2 Tensile strength.
3.2.2.1 Initial. The tubing shall have an initial tensile strength as defined in table I when tested in accordance with ASTM 0412.
3.2.2.2 Air heat test. The tubing shall have a tensile strength as defined in table I when tested in accordance with
ASTM 0573.
3.2.2.3 Immersion. The tubing shall have a tensile strength as defined in table I when tested in accordance with
ASTM 0543.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business