INCH-POUND MS8004D
24 September 2003
SUPERSEDING MS8004C
30 June 1985
DETAIL SPECIFICATION SHEET
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLANGE-TO-FLANGE
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification and
MIL-DTL-25579.
Hose cut-off factor (HCOF) for assembly with class 1 fittings: See table l.
TABLE I. Hose cut-off factor (HCOF) for assembly with class 1 fittings. 1/
Style 2/ Corrosion resistant steel (CRES) |
Fitting ends |
HCOF (size vs length) 3/ |
||||||
1 |
2 |
8 |
10 |
12 |
16 |
20 |
24 |
|
A |
MS27054 |
MS27054 |
2.46 |
2.84 |
2.76 |
3.22 |
3.38 |
3.62 |
B |
MS27054 |
MS27056 |
2.48 |
2.84 |
3.28 |
3.59 |
3.91 |
4.31 |
C |
MS27054 |
MS27058 |
2.44 |
2.83 |
3.30 |
3.66 |
4.03 |
4.49 |
D |
MS27056 |
MS27056 |
2.50 |
2.84 |
3.80 |
3.96 |
4.44 |
5.00 |
E |
MS27056 |
MS27058 |
2.46 |
2.83 |
3.82 |
4.03 |
4.56 |
5.18 |
F |
MS27058 |
MS27058 |
2.42 |
2.82 |
3.84 |
4.10 |
4.58 |
5.36 |
1/ Class 1 fittings, styles A through F, are made from CRES.
2/ For depiction of styles see figure 1.
3/ The HCOF is used in the following calculation to determine the hose length required to produce an assembly of a specific size, style and length: Assembly length - HCOF = Hose length. For example, the hose length required to produce a 23.50 inch length assembly of size 10, style F is calculated as follows: 23.50 - 2.82 = 20.68.
AMSC N/A 1 of 6 FSC 4720
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business