INCH-POUND
MIL-PRF-26385G
24 September 013
SUPERSEDING
MIL-PRF-26385F
16 March 1998
PERFORMANCE SPECIFICATION
HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers ozone resistant hoses for use with pressurizing and oxygen
breathing systems.
1.2 Size. This specification covers hoses conforming to the internal diameters and lengths
identified in the table on figure 1 (see 6.2 and 6.12).
1.3 Part or Identifying Number (PIN). The PINs to be used for the hose acquired to this
specification are created as follows (see figure 1). M26385 dash numbers supersede MS27797
dash numbers.
M
26385
-XX
-XXX
Dash number, length (L)
Dash number, diameter (D)
Specification number
Prefix for military specification
Comments, suggestions, or questions on this document should be addressed to Oklahoma City Air
Logistics Center/ENSDAA, 3001 Staff Drive, Tinker AFB, OK 73145 or emailed to
af71@tinker.af.mil. Since contact information can change, you may want to verify the currency or
this address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business