MIL-DTL-83298C
1.2.2 Bulk hose lengths. Bulk hose lengths are represented by the letter B or S. Bulk lengths are in
increments of 20 feet or more (see 3.4.3.1.1). The S designator is used to define specific lengths in feet
(see 3.4.3.1.2).
Examples:
When 30 feet total length is required the designator is: 030-B
When 30 feet continuous length is required with a 1% tolerance the designator is: 030-S
2. APPLICABLE DOCUMENTS
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-5606
-
Hydraulic Fluid, Petroleum Base, Aircraft, Missile, and Ordnance
MIL-PRF-680
-
Degreasing Solvent
MIL-PRF-7808
-
Lubricating Oil, Aircraft, Turbine Engine, Synthetic Base
MIL-PRF-83282
-
Hydraulic Fluid, Fire Resistant Synthetic Hydrocarbon Base,
Aircraft
MIL-DTL-83296
-
Fitting, Corrosion Resistant Steel, High Temperature, High
Pressure, General Requirements for
MIL-PRF-87257
-
Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic
Hydrocarbon Base, Aircraft and Missile
MIL-DTL-32330
-
Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth
Bore, Flared and Flarless, Tube to Hose, with Swivel Nut
DEPARTMENT OF DEFENSE STANDARD
MIL-STD-130
-
Identification Marking of US Military Property
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business