INCH-POUND
MIL-DTL-29210E
7 April 2009
SUPERSEDING
MIL-DTL-29210D
9 May 2003
DETAIL SPECIFICATION
HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED,
250 PSIG, SATURATED STEAM SERVICE
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers metal lined, wire reinforced, rubber-hose assemblies for
conveyance of saturated steam. The working pressure of this hose is 250 pound-force per square inch
gauge (psig) (1.72 MPa gauge) at a temperature of 406F (208C).
1.2 Part or Identifying Number (PIN). The PIN consists of the letter M, the basic specification
number, a dash, length in feet, hose size, hose end fitting code, hose reinforcement wire type, and
seating material, as shown in the following example:
29210 -25
-200
MF
-S
C
M
Insert material in the female spud (see 1.2.5)
Hose reinforcement wire type (see 1.2.4)
Hose end fitting code (see 1.2.3)
Hose size code number (see 1.2.2)
Length in feet (see 3.3)
Specification number
M prefix
M29210-25-200MF-S describes a hose assembly 25 feet long, 1.5 inch inside diameter, with male
and female ends, stainless steel reinforcement wires and copper seating material.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to FluidFlow@dla.mil.
Since contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
FSC 4720
AMSC N/A
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business