INCH-POUND
MIL-DTL-28693A
1 October 2007
SUPERSEDING
MIL-H-28693(YD)
29 March 1993
DETAIL SPECIFICATION
HOSE, RUBBER, OIL AND GASOLINE DISCHARGE,
SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE,
LONGITUDINALLY REINFORCED, 6 INCH
This specification is approved for use by the Naval Facilities Engineering Command, Department
of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a hose, rubber, oil and gasoline discharge, smooth bore,
lightweight buoyant type, longitudinally reinforced, 6 inch furnished with couplings and a hose support
ring. The system is intended for use as part of a buoyant fueling system. The maximum working
pressure of this hose is 150psi (1 MPa).
1.2 Part or Identifying Number (PIN). The hose PIN consists of the letter M, the basic specification
number, a dash, 100 hose length, and blank for hose assembly, or R for hose support ring.
M
28693 -
100
R
Blank - hose assembly.
R - Ring only (see 3.6.9)
Hose length (see 3.4.3.3)
Specification number
M prefix
PIN example: M28693-100
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business