INCH-POUND
MIL-DTL-26499E
3 April 2006
SUPERSEDING
MIL-DTL-26499D
17 November 2003
DETAIL SPECIFICATION
HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of metal flexible hose assembly with a nominal working
pressure of 2,400 psi (165.47 bar) in the operating temperature range from -65°F to +160°F (-53.89°C to
+71.11°C).
1.2 Part or Identifying Number (PIN). The definitive specification PIN will be formatted to identify each
item covered by this specification. The PIN format will consist of the letter M, specification number
followed by a dash, and a 2 digit number length in inches available in this specification as follows:
M
26499
-XX
Length in inches (see figure 1)
Specification number
M prefix
Example: M26499-24 - Represents a 24 inch hose assembly.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center, Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change, you may want to verify the currency
of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4720
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business